lkml.org 
[lkml]   [2022]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1] soc: imx: imx8mp-blk-ctrl: Add PCIe SYSPLL configurations
On Tue, Nov 01, 2022 at 09:44:41AM +0100, Lucas Stach wrote:
> Hi Shawn, Richard,
>
> Am Samstag, dem 29.10.2022 um 16:45 +0800 schrieb Shawn Guo:
> > On Mon, Oct 24, 2022 at 01:43:09PM +0800, Richard Zhu wrote:
> > > Add PCIe SYSPLL configurations, thus the internal SYSPLL can be used as
> > > i.MX8MP PCIe reference clock.
> > >
> > > The following properties of PHY dts node should be changed accordingly.
> > > - Set 'fsl,refclk-pad-mode' as '<IMX8_PCIE_REFCLK_PAD_OUTPUT>'.
> > > - Change 'clocks' to '<&clk IMX8MP_CLK_HSIO_ROOT>'.
> > >
> > > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> >
> > Applied, thanks!
>
> Sorry for the late reply, but I'm not really happy with the fact that
> the PLL is now unconditionally enabled, even though it is only needed
> when there is no external reference clock source.
> I fear that this will be hard to correct later on as the DT abstraction
> is wrong, as IMX8MP_CLK_HSIO_ROOT is NOT the reference clock for the
> PHY, but the PLL generated clock, which isn't properly exposed with
> this series.
>
> I'm not happy to see this going in in the current state and if not too
> late would like to ask Shawn to remove it from the tree again.

Removed.

Shawn

\
 
 \ /
  Last update: 2022-11-10 08:16    [W:0.063 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site