lkml.org 
[lkml]   [2022]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2] arm64: defconfig: Enable missing configs for mt8183-jacuzzi-juniper
From
Il 09/11/22 20:50, Nícolas F. R. A. Prado ha scritto:
> Enable missing configs in the arm64 defconfig to get all devices probing
> on the mt8183-kukui-jacuzzi-juniper machine.
>
> The devices enabled are: ATH10K SDIO wireless adapter, Elan touchscreen,
> cr50 TPM, MediaTek SPI controller, JPEG video decoder, ANX7625 DSI/DPI
> to DP bridge (used for the internal display), MT8183 sound cards, SCP
> co-processor, MediaTek Global Command Engine (controlled by CMDQ
> driver), MediaTek Smart Voltage Scaling (SVS) engine, CCI frequency
> and voltage scaling, AUXADC thermal sensors.
>
> All symbols are enabled as modules with the exception of SPI, which is
> enabled as builtin since on some platforms like mt8195-cherry, the
> ChromeOS Embedded Controller is connected through SPI and it is
> responsible for the regulators powering the MMC controller used for the
> SD card, and thus SPI support is required for booting.
>
> By enabling the support for all of this machine's devices on the
> defconfig we make it effortless to test the relevant hardware both by
> developers as well as CI systems like KernelCI.
>
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
>

Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>


\
 
 \ /
  Last update: 2022-11-10 09:55    [W:0.049 / U:0.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site