lkml.org 
[lkml]   [2022]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] soundwire: enable optional clock registers for SoundWire 1.2 devices
Date
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

The bus supports the mandatory clock registers for SDCA devices, these
registers can also be optionally supported by SoundWire 1.2 devices
that don't follow the SDCA class specification.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
---
drivers/soundwire/bus.c | 7 ++++---
include/linux/soundwire/sdw.h | 4 ++++
2 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c
index c23275b443ac..55d393247a0f 100644
--- a/drivers/soundwire/bus.c
+++ b/drivers/soundwire/bus.c
@@ -1233,10 +1233,11 @@ static int sdw_slave_set_frequency(struct sdw_slave *slave)

/*
* frequency base and scale registers are required for SDCA
- * devices. They may also be used for 1.2+/non-SDCA devices,
- * but we will need a DisCo property to cover this case
+ * devices. They may also be used for 1.2+/non-SDCA devices.
+ * Driver can set the property, we will need a DisCo property
+ * to discover this case from platform firmware.
*/
- if (!slave->id.class_id)
+ if (!slave->id.class_id && !slave->prop.clock_reg_supported)
return 0;

if (!mclk_freq) {
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h
index 8fb458931772..9a49263c53cf 100644
--- a/include/linux/soundwire/sdw.h
+++ b/include/linux/soundwire/sdw.h
@@ -365,6 +365,9 @@ struct sdw_dpn_prop {
* @sink_dpn_prop: Sink Data Port N properties
* @scp_int1_mask: SCP_INT1_MASK desired settings
* @quirks: bitmask identifying deltas from the MIPI specification
+ * @clock_reg_supported: the Peripheral implements the clock base and scale
+ * registers introduced with the SoundWire 1.2 specification. SDCA devices
+ * do not need to set this boolean property as the registers are required.
*/
struct sdw_slave_prop {
u32 mipi_revision;
@@ -388,6 +391,7 @@ struct sdw_slave_prop {
struct sdw_dpn_prop *sink_dpn_prop;
u8 scp_int1_mask;
u32 quirks;
+ bool clock_reg_supported;
};

#define SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY BIT(0)
--
2.25.1
\
 
 \ /
  Last update: 2022-11-11 03:15    [W:0.048 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site