lkml.org 
[lkml]   [2022]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v4 1/2] dt-bindings: mfd: Add bindings for MAX5970 and MAX5978
Date

On Tue, 01 Nov 2022 17:53:43 +0100, Naresh Solanki wrote:
> From: Marcello Sylvester Bauer <sylv@sylv.io>
>
> The MAX597x is a hot swap controller with configurable fault protection.
> It also has 10bit ADC for current & voltage measurements.
>
> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
> Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
> ---
> .../devicetree/bindings/mfd/max5970.yaml | 164 ++++++++++++++++++
> 1 file changed, 164 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/max5970.yaml
>

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/mfd/max5970.example.dts:21.22-34.19: Warning (i2c_bus_reg): /example-0/i2c/leds: missing or empty reg property
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/max5970.example.dtb: regulator@3a: 'vss2-supply' does not match any of the regexes: 'pinctrl-[0-9]+'
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/max5970.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.

\
 
 \ /
  Last update: 2022-11-02 03:27    [W:0.138 / U:1.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site