lkml.org 
[lkml]   [2022]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] mfd: Add Freescale i.MX8qxp Control and Status Registers (CSR) module driver
From
Date
On Sun, 2022-08-14 at 16:04 +0800, Liu Ying wrote:
> Freescale i.MX8qxp Control and Status Registers (CSR) module is a
> system
> controller. It represents a set of miscellaneous registers of a
> specific
> subsystem. It may provide control and/or status report interfaces to
> a
> mix of standalone hardware devices within that subsystem.
>
> The CSR module in i.MX8qm/qxp SoCs is a child node of a simple power-
> managed
> bus(i.MX8qxp pixel link MSI bus). To propagate power management
> operations
> of the CSR module's child devices to that simple power-managed bus,
> add a
> dedicated driver for the CSR module. Also, the driver would populate
> the CSR
> module's child devices.
>
> Signed-off-by: Liu Ying <victor.liu@nxp.com>
> ---
> The Freescale i.MX8qxp CSR DT bindings is at
> Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml.
>
> drivers/mfd/Kconfig | 10 +++++++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/fsl-imx8qxp-csr.c | 53
> +++++++++++++++++++++++++++++++++++
> 3 files changed, 64 insertions(+)
> create mode 100644 drivers/mfd/fsl-imx8qxp-csr.c
>

Gentle ping...

Regards,
Liu Ying

\
 
 \ /
  Last update: 2022-10-06 05:27    [W:0.059 / U:2.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site