lkml.org 
[lkml]   [2022]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.4 44/51] xfs: fix memory corruption during remote attr value buffer invalidation
Date
From: "Darrick J. Wong" <darrick.wong@oracle.com>

commit e8db2aafcedb7d88320ab83f1000f1606b26d4d7 upstream.

[Replaced XFS_IS_CORRUPT() calls with ASSERT() for 5.4.y backport]

While running generic/103, I observed what looks like memory corruption
and (with slub debugging turned on) a slub redzone warning on i386 when
inactivating an inode with a 64k remote attr value.

On a v5 filesystem, maximally sized remote attr values require one block
more than 64k worth of space to hold both the remote attribute value
header (64 bytes). On a 4k block filesystem this results in a 68k
buffer; on a 64k block filesystem, this would be a 128k buffer. Note
that even though we'll never use more than 65,600 bytes of this buffer,
XFS_MAX_BLOCKSIZE is 64k.

This is a problem because the definition of struct xfs_buf_log_format
allows for XFS_MAX_BLOCKSIZE worth of dirty bitmap (64k). On i386 when we
invalidate a remote attribute, xfs_trans_binval zeroes all 68k worth of
the dirty map, writing right off the end of the log item and corrupting
memory. We've gotten away with this on x86_64 for years because the
compiler inserts a u32 padding on the end of struct xfs_buf_log_format.

Fortunately for us, remote attribute values are written to disk with
xfs_bwrite(), which is to say that they are not logged. Fix the problem
by removing all places where we could end up creating a buffer log item
for a remote attribute value and leave a note explaining why. Next,
replace the open-coded buffer invalidation with a call to the helper we
created in the previous patch that does better checking for bad metadata
before marking the buffer stale.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/xfs/libxfs/xfs_attr_remote.c | 37 ++++++++++++++++++++++++++-----
fs/xfs/xfs_attr_inactive.c | 47 +++++++++++-----------------------------
2 files changed, 44 insertions(+), 40 deletions(-)

--- a/fs/xfs/libxfs/xfs_attr_remote.c
+++ b/fs/xfs/libxfs/xfs_attr_remote.c
@@ -25,6 +25,23 @@
#define ATTR_RMTVALUE_MAPSIZE 1 /* # of map entries at once */

/*
+ * Remote Attribute Values
+ * =======================
+ *
+ * Remote extended attribute values are conceptually simple -- they're written
+ * to data blocks mapped by an inode's attribute fork, and they have an upper
+ * size limit of 64k. Setting a value does not involve the XFS log.
+ *
+ * However, on a v5 filesystem, maximally sized remote attr values require one
+ * block more than 64k worth of space to hold both the remote attribute value
+ * header (64 bytes). On a 4k block filesystem this results in a 68k buffer;
+ * on a 64k block filesystem, this would be a 128k buffer. Note that the log
+ * format can only handle a dirty buffer of XFS_MAX_BLOCKSIZE length (64k).
+ * Therefore, we /must/ ensure that remote attribute value buffers never touch
+ * the logging system and therefore never have a log item.
+ */
+
+/*
* Each contiguous block has a header, so it is not just a simple attribute
* length to FSB conversion.
*/
@@ -400,17 +417,25 @@ xfs_attr_rmtval_get(
(map[i].br_startblock != HOLESTARTBLOCK));
dblkno = XFS_FSB_TO_DADDR(mp, map[i].br_startblock);
dblkcnt = XFS_FSB_TO_BB(mp, map[i].br_blockcount);
- error = xfs_trans_read_buf(mp, args->trans,
- mp->m_ddev_targp,
- dblkno, dblkcnt, 0, &bp,
- &xfs_attr3_rmt_buf_ops);
- if (error)
+ bp = xfs_buf_read(mp->m_ddev_targp, dblkno, dblkcnt, 0,
+ &xfs_attr3_rmt_buf_ops);
+ if (!bp)
+ return -ENOMEM;
+ error = bp->b_error;
+ if (error) {
+ xfs_buf_ioerror_alert(bp, __func__);
+ xfs_buf_relse(bp);
+
+ /* bad CRC means corrupted metadata */
+ if (error == -EFSBADCRC)
+ error = -EFSCORRUPTED;
return error;
+ }

error = xfs_attr_rmtval_copyout(mp, bp, args->dp->i_ino,
&offset, &valuelen,
&dst);
- xfs_trans_brelse(args->trans, bp);
+ xfs_buf_relse(bp);
if (error)
return error;

--- a/fs/xfs/xfs_attr_inactive.c
+++ b/fs/xfs/xfs_attr_inactive.c
@@ -25,22 +25,20 @@
#include "xfs_error.h"

/*
- * Look at all the extents for this logical region,
- * invalidate any buffers that are incore/in transactions.
+ * Invalidate any incore buffers associated with this remote attribute value
+ * extent. We never log remote attribute value buffers, which means that they
+ * won't be attached to a transaction and are therefore safe to mark stale.
+ * The actual bunmapi will be taken care of later.
*/
STATIC int
-xfs_attr3_leaf_freextent(
- struct xfs_trans **trans,
+xfs_attr3_rmt_stale(
struct xfs_inode *dp,
xfs_dablk_t blkno,
int blkcnt)
{
struct xfs_bmbt_irec map;
- struct xfs_buf *bp;
xfs_dablk_t tblkno;
- xfs_daddr_t dblkno;
int tblkcnt;
- int dblkcnt;
int nmap;
int error;

@@ -57,35 +55,18 @@ xfs_attr3_leaf_freextent(
nmap = 1;
error = xfs_bmapi_read(dp, (xfs_fileoff_t)tblkno, tblkcnt,
&map, &nmap, XFS_BMAPI_ATTRFORK);
- if (error) {
+ if (error)
return error;
- }
ASSERT(nmap == 1);
- ASSERT(map.br_startblock != DELAYSTARTBLOCK);

/*
- * If it's a hole, these are already unmapped
- * so there's nothing to invalidate.
+ * Mark any incore buffers for the remote value as stale. We
+ * never log remote attr value buffers, so the buffer should be
+ * easy to kill.
*/
- if (map.br_startblock != HOLESTARTBLOCK) {
-
- dblkno = XFS_FSB_TO_DADDR(dp->i_mount,
- map.br_startblock);
- dblkcnt = XFS_FSB_TO_BB(dp->i_mount,
- map.br_blockcount);
- bp = xfs_trans_get_buf(*trans,
- dp->i_mount->m_ddev_targp,
- dblkno, dblkcnt, 0);
- if (!bp)
- return -ENOMEM;
- xfs_trans_binval(*trans, bp);
- /*
- * Roll to next transaction.
- */
- error = xfs_trans_roll_inode(trans, dp);
- if (error)
- return error;
- }
+ error = xfs_attr_rmtval_stale(dp, &map, 0);
+ if (error)
+ return error;

tblkno += map.br_blockcount;
tblkcnt -= map.br_blockcount;
@@ -174,9 +155,7 @@ xfs_attr3_leaf_inactive(
*/
error = 0;
for (lp = list, i = 0; i < count; i++, lp++) {
- tmp = xfs_attr3_leaf_freextent(trans, dp,
- lp->valueblk, lp->valuelen);
-
+ tmp = xfs_attr3_rmt_stale(dp, lp->valueblk, lp->valuelen);
if (error == 0)
error = tmp; /* save only the 1st errno */
}

\
 
 \ /
  Last update: 2022-10-05 13:40    [W:0.187 / U:1.820 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site