lkml.org 
[lkml]   [2022]   [Oct]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH RESEND v4 0/2] drivers: bus: Add Freescale i.MX8qxp pixel link MSI bus support
From
Date
On Mon, 2022-10-17 at 15:40 +0800, Liu Ying wrote:
> Hi,
>
> This series aims to add Freescale i.MX8qxp pixel link MSI bus support
> by using the existing simple-pm-bus driver. A power domain and two input
> clocks need to be enabled before the MSI bus accesses it's child devices,
> which matches what a simple power-managed bus is(See simple-pm-bus.yaml).
>
> Patch 1 enables/disables functional clock(s) as a bulk in the
> simple-pm-bus driver when the simple-pm-bus is being power managed,
> since the MSI bus takes the two input clocks as functional clocks.
>
> Patch 2 adds dt-bindings for the MSI bus.
>
> v3->v4:
> * Drop patch 1 in v3, because simple-bus/simple-mfd devices probed by the
> simple-pm-bus driver should not be child nodes of simple-pm-bus at all,
> as simple-bus/simple-mfd's child devices PM operations cannot be propagated
> to simple-pm-bus. Those simple-bus/simple-mfd devices needs dedicated drivers.
> * Drop unnecessary 'bus == NULL' check from simple_pm_bus_runtime_{suspend,resume}.
> for patch 1 in v4. (Geert)
> * Add Geert's R-b tag on patch 1 in v4.
> * Add child nodes in the example MSI bus node of the MSI bus dt-binding. (Krzysztof)
> * Resend v4 to imply this series is based on v6.0-rc1 so that there are not any
> dependencies for the MSI bus dt-binding. (Rob)
> * Resend v4 based on v6.1-rc1. (Greg)
> * Add Rob's R-b tag on patch 2 in v4.
>
> v2->v3:
> * Add a pattern property to allow child nodes in the MSI bus dt-binding. (Rob)
>
> v1->v2:
> Address Krzysztof's comments on patch 3:
> * Add a select to explicitly select the MSI bus dt-binding.
> * List 'simple-pm-bus' explicitly as one item of compatible strings.
> * Require compatible and reg properties.
> * Put reg property just after compatible property in example.
>
> Liu Ying (2):
> drivers: bus: simple-pm-bus: Use clocks
> dt-bindings: bus: Add Freescale i.MX8qxp pixel link MSI bus binding
>
> .../bus/fsl,imx8qxp-pixel-link-msi-bus.yaml | 232 ++++++++++++++++++
> drivers/bus/simple-pm-bus.c | 48 ++++
> 2 files changed, 280 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml

Gentle ping...

If there is no more comments on this series, can someone pick it up
please?

Regards,
Liu Ying

\
 
 \ /
  Last update: 2022-10-31 09:32    [W:0.060 / U:0.800 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site