lkml.org 
[lkml]   [2022]   [Oct]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 3/3] arm64: dts: qcom: Add touchscreen and touchpad support for evoker
Date
Change touchpad and touchscreen node for evoker
Touchpad: SA461D-1011
Touchscreen: GT7986U

Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
---

Changes in v6:
- add removed pinctrl and align touchscreen label with herobrine board

Changes in v5:
- Touchscreen / trackpad patch new for v5

.../boot/dts/qcom/sc7280-herobrine-evoker.dtsi | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi
index e78072159d54b..d1723fbffae67 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi
@@ -23,16 +23,15 @@ ap_tp_i2c: &i2c0 {
status = "okay";
clock-frequency = <400000>;

- trackpad: trackpad@2c {
- compatible = "hid-over-i2c";
- reg = <0x2c>;
+ trackpad: trackpad@15 {
+ compatible = "elan,ekth3000";
+ reg = <0x15>;
pinctrl-names = "default";
pinctrl-0 = <&tp_int_odl>;

interrupt-parent = <&tlmm>;
interrupts = <7 IRQ_TYPE_EDGE_FALLING>;

- hid-descr-addr = <0x20>;
vcc-supply = <&pp3300_z1>;

wakeup-source;
@@ -43,9 +42,9 @@ ts_i2c: &i2c13 {
status = "okay";
clock-frequency = <400000>;

- ap_ts: touchscreen@10 {
- compatible = "elan,ekth6915";
- reg = <0x10>;
+ ap_ts: touchscreen@5d {
+ compatible = "goodix,gt7375p";
+ reg = <0x5d>;
pinctrl-names = "default";
pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>;

@@ -54,7 +53,7 @@ ap_ts: touchscreen@10 {

reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;

- vcc33-supply = <&ts_avdd>;
+ vdd-supply = <&ts_avdd>;
};
};

--
2.34.1
\
 
 \ /
  Last update: 2022-10-03 12:29    [W:0.056 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site