lkml.org 
[lkml]   [2022]   [Oct]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v3 04/13] coresight: etm4x: Update ETM4 driver to use Trace ID API
From
On 03/10/2022 10:31, Suzuki K Poulose wrote:
> On 09/08/2022 23:33, Mike Leach wrote:
>> The trace ID API is now used to allocate trace IDs for ETM4.x / ETE
>> devices.
>>
>> For perf sessions, these will be allocated on enable, and released on
>> disable.
>>
>> For sysfs sessions, these will be allocated on enable, but only released
>> on reset. This allows the sysfs session to interrogate the Trace ID used
>> after the session is over - maintaining functional consistency with the
>> previous allocation scheme.
>>
>> The trace ID will also be allocated on read of the mgmt/trctraceid file.
>> This ensures that if perf or sysfs read this before enabling trace, the
>> value will be the one used for the trace session.
>>
>> Trace ID initialisation is removed from the _probe() function.
>>
>> Signed-off-by: Mike Leach <mike.leach@linaro.org>
>> ---
>>   .../coresight/coresight-etm4x-core.c          | 79 +++++++++++++++++--
>>   .../coresight/coresight-etm4x-sysfs.c         | 27 ++++++-
>>   drivers/hwtracing/coresight/coresight-etm4x.h |  3 +
>>   3 files changed, 100 insertions(+), 9 deletions(-)
>>
>> diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c
>> b/drivers/hwtracing/coresight/coresight-etm4x-core.c
>> index cf249ecad5a5..b4fb28ce89fd 100644
>> --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c
>> +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c
>> @@ -42,6 +42,7 @@
>>   #include "coresight-etm4x-cfg.h"
>>   #include "coresight-self-hosted-trace.h"
>>   #include "coresight-syscfg.h"
>> +#include "coresight-trace-id.h"
>>   static int boot_enable;
>>   module_param(boot_enable, int, 0444);
>> @@ -234,6 +235,50 @@ static int etm4_trace_id(struct coresight_device
>> *csdev)
>>       return drvdata->trcid;
>>   }
>> +int etm4_read_alloc_trace_id(struct etmv4_drvdata *drvdata)
>> +{
>> +    int trace_id;
>> +
>> +    /*
>> +     * This will allocate a trace ID to the cpu,
>> +     * or return the one currently allocated.
>> +     */
>> +    /* trace id function has its own lock */
>> +    trace_id = coresight_trace_id_get_cpu_id(drvdata->cpu);
>> +    if (IS_VALID_ID(trace_id))
>> +        drvdata->trcid = (u8)trace_id;
>> +    else
>> +        dev_err(&drvdata->csdev->dev,
>> +            "Failed to allocate trace ID for %s on CPU%d\n",
>> +            dev_name(&drvdata->csdev->dev), drvdata->cpu);
>> +    return trace_id;
>> +}
>> +
>> +static int etm4_set_current_trace_id(struct etmv4_drvdata *drvdata)
>> +{
>> +    int trace_id;
>> +
>> +    /*
>> +     * Set the currently allocated trace ID - perf allocates IDs
>> +     * as part of setup_aux for all CPUs it may use.
>> +     */
>> +    trace_id = coresight_trace_id_read_cpu_id(drvdata->cpu);
>> +    if (IS_VALID_ID(trace_id)) {
>> +        drvdata->trcid = (u8)trace_id;
>> +        return 0;
>> +    }
>> +
>> +    dev_err(&drvdata->csdev->dev, "Failed to set trace ID for %s on
>> CPU%d\n",
>> +        dev_name(&drvdata->csdev->dev), drvdata->cpu);
>> +
>> +    return -EINVAL;
>> +}
>
>
>> +
>> +void etm4_release_trace_id(struct etmv4_drvdata *drvdata)
>> +{
>> +    coresight_trace_id_put_cpu_id(drvdata->cpu);
>> +}
>> +
>>   struct etm4_enable_arg {
>>       struct etmv4_drvdata *drvdata;
>>       int rc;
>> @@ -729,6 +774,15 @@ static int etm4_enable_perf(struct
>> coresight_device *csdev,
>>       ret = etm4_parse_event_config(csdev, event);
>>       if (ret)
>>           goto out;
>> +
>> +    /*
>> +     * perf allocates cpu ids as part of setup - device needs to use
>> +     * the allocated ID.
>> +     */
>> +    ret = etm4_set_current_trace_id(drvdata);
>
> So, when do we allocate an id in perf mode ? As far as I can see, this
> should be the same as etm4_read_alloc_trace_id() ? Why are they any
> different ?
>
>> +    if (ret < 0)
>> +        goto out;
>> +
>>       /* And enable it */
>>       ret = etm4_enable_hw(drvdata);
>> @@ -753,6 +807,11 @@ static int etm4_enable_sysfs(struct
>> coresight_device *csdev)
>>       spin_lock(&drvdata->spinlock);
>> +    /* sysfs needs to read and allocate a trace ID */
>> +    ret = etm4_read_alloc_trace_id(drvdata);
>> +    if (ret < 0)
>> +        goto unlock_sysfs_enable;
>> +
>>       /*
>>        * Executing etm4_enable_hw on the cpu whose ETM is being enabled
>>        * ensures that register writes occur when cpu is powered.
>> @@ -764,6 +823,11 @@ static int etm4_enable_sysfs(struct
>> coresight_device *csdev)
>>           ret = arg.rc;
>>       if (!ret)
>>           drvdata->sticky_enable = true;
>> +
>> +    if (ret)
>> +        etm4_release_trace_id(drvdata);
>> +
>> +unlock_sysfs_enable:
>>       spin_unlock(&drvdata->spinlock);
>>       if (!ret)
>> @@ -895,6 +959,8 @@ static int etm4_disable_perf(struct
>> coresight_device *csdev,
>>       /* TRCVICTLR::SSSTATUS, bit[9] */
>>       filters->ssstatus = (control & BIT(9));
>> +    /* The perf event will release trace ids when it is destroyed */
>> +
>
> At this patch level, there is no release of trace id ? Is that missed in
> this patch ? Or am I missing something ?

I think the above change only comes in PATCH 7. May be that patch needs
to be rearranged in order ? Otherwise git-bisect can break running a
perf session on cs_etm, with missing traceid.

Suzuki

\
 
 \ /
  Last update: 2022-10-03 11:43    [W:0.079 / U:0.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site