lkml.org 
[lkml]   [2022]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v4 08/13] dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Improve pinctrl subnode and property descriptions
    Date
    From: Yassine Oudjana <y.oudjana@protonmail.com>

    Change "subnodes" to "subnode" in subnode description for better grammatical
    accuracy, capitalize pinmux description, wrap all descriptions at 80 characters,
    and remove literal style indicators from descriptions that don't need their new
    lines preserved.

    Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
    ---
    .../pinctrl/mediatek,mt6779-pinctrl.yaml | 19 ++++++++++---------
    1 file changed, 10 insertions(+), 9 deletions(-)

    diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
    index 23b1f7867afb..70e4ffa2d897 100644
    --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
    +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
    @@ -118,11 +118,12 @@ patternProperties:
    patternProperties:
    '^pins':
    type: object
    - description: |
    - A pinctrl node should contain at least one subnodes representing the
    + description:
    + A pinctrl node should contain at least one subnode representing the
    pinctrl groups available on the machine. Each subnode will list the
    - pins it needs, and how they should be configured, with regard to muxer
    - configuration, pullups, drive strength, input enable/disable and input schmitt.
    + pins it needs, and how they should be configured, with regard to
    + muxer configuration, pullups, drive strength, input enable/disable
    + and input schmitt.
    allOf:
    - $ref: pinmux-node.yaml
    - $ref: pincfg-node.yaml
    @@ -130,9 +131,9 @@ patternProperties:
    properties:
    pinmux:
    description:
    - integer array, represents gpio pin number and mux setting.
    - Supported pin number and mux varies for different SoCs, and are defined
    - as macros in boot/dts/<soc>-pinfunc.h directly.
    + Integer array, represents gpio pin number and mux setting.
    + Supported pin number and mux varies for different SoCs, and are
    + defined as macros in boot/dts/<soc>-pinfunc.h directly.

    bias-disable: true

    @@ -141,7 +142,7 @@ patternProperties:
    - type: boolean
    - enum: [100, 101, 102, 103]
    description: Pull up PUPD/R0/R1 type define value.
    - description: |
    + description:
    For normal pull up type, it is not necessary to specify R1R0
    values; When pull up type is PUPD/R0/R1, adding R1R0 defines
    will set different resistance values.
    @@ -151,7 +152,7 @@ patternProperties:
    - type: boolean
    - enum: [100, 101, 102, 103]
    description: Pull down PUPD/R0/R1 type define value.
    - description: |
    + description:
    For normal pull down type, it is not necessary to specify R1R0
    values; When pull down type is PUPD/R0/R1, adding R1R0 defines
    will set different resistance values.
    --
    2.38.1
    \
     
     \ /
      Last update: 2022-10-28 17:36    [W:11.662 / U:0.016 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site