lkml.org 
[lkml]   [2022]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 05/11] arm64: dts: ti: k3-am65: Enable ECAP nodes at the board level
Date
ECAP nodes defined in the top-level AM65x SoC dtsi files are incomplete
and will not be functional unless they are extended with pinmux
information. (These and the EPWM nodes could be used to trigger internal
actions but they are not used like that currently)

As the pinmux is only known at the board integration level, these
nodes should only be enabled when provided with this information.

Disable the ECAP nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.

Signed-off-by: Andrew Davis <afd@ti.com>
---
arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi | 1 +
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 1 +
arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 1 +
3 files changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index fa4b6eb02fa57..56562081a8e52 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -550,6 +550,7 @@ &mcu_cpsw {
};

&ecap0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&ecap0_pins_default>;
};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 49287f8493aea..fbb631c7664d2 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -205,6 +205,7 @@ ecap0: pwm@3100000 {
power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 39 0>;
clock-names = "fck";
+ status = "disabled";
};

main_spi0: spi@2100000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 3f5a5ebfc8f3c..f4b8747ebaef6 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -337,6 +337,7 @@ &main_i2c2 {
};

&ecap0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&ecap0_pins_default>;
};
--
2.37.3
\
 
 \ /
  Last update: 2022-10-28 16:25    [W:0.122 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site