lkml.org 
[lkml]   [2022]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 11/13] dt-bindings: phy: qcom,qmp-usb: fix sc8280xp binding
On Thu, Oct 27, 2022 at 10:15:45PM -0400, Krzysztof Kozlowski wrote:
> On 24/10/2022 06:06, Johan Hovold wrote:
> > The current QMP USB PHY bindings are based on the original MSM8996 PCIe
> > PHY binding which provided multiple PHYs per IP block and these in turn
> > were described by child nodes.
> >
> > The QMP USB PHY block only provide a single PHY and the remnant child
> > node does not really reflect the hardware.
> >
> > The original MSM8996 binding also ended up describing the individual
> > register blocks as belonging to either the wrapper node or the PHY child
> > nodes.
> >
>
> (...)
>
> > then:
> > diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb-phy.yaml
> > new file mode 100644
> > index 000000000000..95ee81d782f9
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb-phy.yaml
>
> Filename based on compatible, so in this case
> "qcom,sc8280xp-qmp-usb3-uni-phy.yaml", unless it's like the PCI case?

Yes, you're right. Thanks for catching that. This should be the only
sc8280xp USB PHY compatible so the file name should be updates as you
suggested.

I'll wait a bit and see if Vinod has any comments before respinning this
series.

Johan

\
 
 \ /
  Last update: 2022-10-28 08:10    [W:0.112 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site