lkml.org 
[lkml]   [2022]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v1 8/9] arm64: dts: qcom: sm8350-hdk: Enable display & dsi nodes
From
On 28/10/2022 08:08, Robert Foss wrote:
> Enable the display subsystem and the dsi0 output for
> the sm8350-hdk board.
>
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> index e6deb08c6da0..6e07feb4b3b2 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> @@ -213,10 +213,32 @@ &cdsp {
> firmware-name = "qcom/sm8350/cdsp.mbn";
> };
>
> +&dispcc {
> + status = "okay";
> +};
> +
> +&dsi0 {
> + status = "okay";

Status is the last property.


Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-10-29 00:04    [W:0.263 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site