lkml.org 
[lkml]   [2022]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v4 00/10] drm/msm: Fix math issues in MSM DSC implementation
From
Hi Marijn

On 10/26/2022 11:28 AM, Marijn Suijten wrote:
> Various removals of complex yet unnecessary math, fixing all uses of
> drm_dsc_config::bits_per_pixel to deal with the fact that this field
> includes four fractional bits, and finally making sure that
> range_bpg_offset contains values 6-bits wide to prevent overflows in
> drm_dsc_pps_payload_pack().
>
> Altogether this series is responsible for solving _all_ Display Stream
> Compression issues and artifacts on the Sony Tama (sdm845) Akatsuki
> smartphone (2880x1440p).
>
> Changes since v3:
> - Swap patch 7 and 8 to make sure msm_host is available inside
> dsi_populate_dsc_params();
> - Reword patch 6 (Migrate to drm_dsc_compute_rc_parameters()) to more
> clearly explain why the FIXME wasn't solved initially, but why it can
> (and should!) be resolved now.
>
> v3: https://lore.kernel.org/linux-arm-msm/20221009184824.457416-1-marijn.suijten@somainline.org/T/#u
>
> Changes since v2:
> - Generalize mux_word_size setting depending on bits_per_component;
> - Migrate DSI's DSC calculations to drm_dsc_compute_rc_parameters(),
> implicitly addressing existing math issues;
> - Disallow any bits_per_component other than 8, until hardcoded values
> are updated and tested to support such cases.
>
> v2: https://lore.kernel.org/linux-arm-msm/20221005181657.784375-1-marijn.suijten@somainline.org/T/#u
>
> Changes since v1:
>
> - Propagate r-b's, except (obviously) in patches that were (heavily)
> modified;
> - Remove accidental debug code in dsi_cmd_dma_add;
> - Move Range BPG Offset masking out of DCS PPS packing, back into the
> DSI driver when it is assigned to drm_dsc_config (this series is now
> strictly focusing on drm/msm again);
> - Replace modulo-check resulting in conditional increment with
> DIV_ROUND_UP;
> - Remove repeated calculation of slice_chunk_size;
> - Use u16 instead of int when handling bits_per_pixel;
> - Use DRM_DEV_ERROR instead of pr_err in DSI code;
> - Also remove redundant target_bpp_x16 variable.
>
> v1: https://lore.kernel.org/linux-arm-msm/20221001190807.358691-1-marijn.suijten@somainline.org/T/#u
>
> Marijn Suijten (10):
> drm/msm/dsi: Remove useless math in DSC calculations
> drm/msm/dsi: Remove repeated calculation of slice_per_intf
> drm/msm/dsi: Use DIV_ROUND_UP instead of conditional increment on
> modulo
> drm/msm/dsi: Reuse earlier computed dsc->slice_chunk_size
> drm/msm/dsi: Appropriately set dsc->mux_word_size based on bpc
> drm/msm/dsi: Migrate to drm_dsc_compute_rc_parameters()
> drm/msm/dsi: Account for DSC's bits_per_pixel having 4 fractional bits
> drm/msm/dsi: Disallow 8 BPC DSC configuration for alternative BPC
> values
> drm/msm/dpu1: Account for DSC's bits_per_pixel having 4 fractional
> bits
> drm/msm/dsi: Prevent signed BPG offsets from bleeding into adjacent
> bits
>
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c | 11 +-
> drivers/gpu/drm/msm/dsi/dsi_host.c | 121 ++++++---------------
> 2 files changed, 37 insertions(+), 95 deletions(-)
>
> --
> 2.38.1
>

To keep the -fixes cycle to have only critical fixes (others are
important too but are cleanups), I was thinking of absorbing patches
7,8,9 and 10 alone in the -fixes cycle and for patches 1-6, will go
through the 6.2 push.

Let me know if there are any concerns if we just take patches 7,8,9 and
10 separately.

Thanks

Abhinav

\
 
 \ /
  Last update: 2022-10-28 20:34    [W:0.124 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site