lkml.org 
[lkml]   [2022]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] firewire: ohci: convert to generic power management
On Tue, Oct 25, 2022 at 04:25:21PM -0500, Bjorn Helgaas wrote:
> N.B. This changes the order of pmac_ohci_off() and pmac_ohci_on().
> Previously, pmac_ohci_off() was called *after* pci_save_state() and
> pci_set_power_state(), and this change calls it *before*.
>
> Similarly, pmac_ohci_on() was previously called *before*
> pci_set_power_state() and pci_restore_state() and this change calls it
> *after*.

Seems likely the ordering change may break things.

pmac_ohci_on/off() toggles PMAC_FTR_1394_ENABLE, which is defined as:

* enable/disable the firewire cell of an uninorth ASIC.

It sounds like it will cut power to the firewire controller and I'd
expect that pci_save_state() will then not be able to access config
space.

The only way to make this work is to define a struct dev_pm_domain
whose ->suspend_noirq callback first invokes the pci_bus_type
->suspend_noirq callback and then cuts power to the firewire cell
by calling pmac_ohci_off().

I've done something like this for Thunderbolt power management on
x86 Macs a few years back but didn't get around to upstream it so far:

https://github.com/l1k/linux/commit/4db7f0b1f5c9

Thanks,

Lukas

\
 
 \ /
  Last update: 2022-10-27 08:04    [W:0.040 / U:0.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site