lkml.org 
[lkml]   [2022]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/5] media: i2c: ov5645: Use runtime PM
Hi Prabhakar,

On Thu, Oct 27, 2022 at 01:01:52PM +0100, Lad, Prabhakar wrote:
> Hi Sakari,
>
> On Thu, Oct 27, 2022 at 12:20 PM Sakari Ailus
> <sakari.ailus@linux.intel.com> wrote:
> >
> > Hi Prabhakar,
> >
> > One more comment.
> >
> > On Fri, Oct 14, 2022 at 07:34:56PM +0100, Prabhakar wrote:
> > > @@ -1209,12 +1190,16 @@ static int ov5645_probe(struct i2c_client *client)
> > >
> > > dev_info(dev, "OV5645 detected at address 0x%02x\n", client->addr);
> > >
> > > + pm_runtime_set_active(dev);
> > > + pm_runtime_get_noresume(dev);
> > > + pm_runtime_enable(dev);
> >
> > You won't gain anything by eanbling runtime PM here. Just move it to the
> > end of the function before the rest of the calls. Error handling becomes
> > more simple.
> >
> If I move the above calls below I get the below warning:
>
> [ 2.633386] ov5645 0-003c: Runtime PM usage count underflow!
>
> This is because of the last patch which moves ov5645_entity_init_cfg()
> before registering the subdev. ov5645_entity_init_cfg() calls s_ctrl
> due to which we are seeing the above message. Please let me know how
> to proceed on this.

Ah. Yes, this is a problem with the usage pattern of
pm_runtime_get_if_in_use(). But please don't change that.

You can still move enabling runtime PM later in the function.

--
Kind regards,

Sakari Ailus

\
 
 \ /
  Last update: 2022-10-27 14:47    [W:0.074 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site