lkml.org 
[lkml]   [2022]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 net-next 3/7] dt-bindings: net: dsa: qca8k: utilize shared dsa.yaml
Hi Rob and Vladimir,

On Thu, Oct 27, 2022 at 04:25:53AM +0300, Vladimir Oltean wrote:
> Hi Rob,
>
> On Tue, Oct 25, 2022 at 04:21:14PM -0500, Rob Herring wrote:
> > On Mon, Oct 24, 2022 at 10:03:51PM -0700, Colin Foster wrote:
> > > The dsa.yaml binding contains duplicated bindings for address and size
> > > cells, as well as the reference to dsa-port.yaml. Instead of duplicating
> > > this information, remove the reference to dsa-port.yaml and include the
> > > full reference to dsa.yaml.
> >
> > I don't think this works without further restructuring. Essentially,
> > 'unevaluatedProperties' on works on a single level. So every level has
> > to define all properties at that level either directly in
> > properties/patternProperties or within a $ref.
> >
> > See how graph.yaml is structured and referenced for an example how this
> > has to work.
> >
> > > @@ -104,8 +98,6 @@ patternProperties:
> > > SGMII on the QCA8337, it is advised to set this unless a communication
> > > issue is observed.
> > >
> > > - unevaluatedProperties: false
> > > -
> >
> > Dropping this means any undefined properties in port nodes won't be an
> > error. Once I fix all the issues related to these missing, there will be
> > a meta-schema checking for this (this could be one I fixed already).
>
> I may be misreading, but here, "unevaluatedProperties: false" from dsa.yaml
> (under patternProperties: "^(ethernet-)?port@[0-9]+$":) is on the same
> level as the "unevaluatedProperties: false" that Colin is deleting.
>
> In fact, I believe that it is precisely due to the "unevaluatedProperties: false"
> from dsa.yaml that this is causing a failure now:
>
> net/dsa/qca8k.example.dtb: switch@10: ports:port@6: Unevaluated properties are not allowed ('qca,sgmii-rxclk-falling-edge' was unexpected)
>
> Could you please explain why is the 'qca,sgmii-rxclk-falling-edge'
> property not evaluated from the perspective of dsa.yaml in the example?
> It's a head scratcher to me.
>
> May it have something to do with the fact that Colin's addition:
>
> $ref: "dsa.yaml#"
>
> is not expressed as:
>
> allOf:
> - $ref: "dsa.yaml#"
>
> ?

Looking into documentation (I promise I did some reading / research to
try to get a stronger understanding of the documentation yaml) I came
across the history of ethernet-controller.yaml which suggests to me that
the pattern:

allOf:
- $ref:

is frowned upon
commit 3d21a4609335: ("dt-bindings: Remove cases of 'allOf' containing a
'$ref'")

I do have a knack for misinterpreting data, but I read that as:
allOf:
- $ref:
shouldn't be used unless there's more than one list entry.


All that aside, I did upgrade from 2022.5 to 2022.9 just now and do see
these dtschema errors now. I'll be sure to use this before resubmitting.


>
> If yes, can you explain exactly what is the difference with respect to
> unevaluatedProperties?
>
> > > oneOf:
> > > - required:
> > > - ports
> > > @@ -116,7 +108,7 @@ required:
> > > - compatible
> > > - reg
> > >
> > > -additionalProperties: true
> >
> > This should certainly be changed though. We should only have 'true' for
> > incomplete collections of properties. IOW, for common bindings.

That makes a lot of sense - and helps me understand why I had so much
trouble understanding why it originally was "additionalProperties: true"


I'll obviously take another look at this. The nxp,sja1105.yaml seemed to
be most akin to what the qca8k.yaml needed to be - that is "take
dsa.yaml and add a couple extra properties to the ports nodes". But
there's always subleties.


> >
> > > +unevaluatedProperties: false

\
 
 \ /
  Last update: 2022-10-27 05:36    [W:0.066 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site