lkml.org 
[lkml]   [2022]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/3] arch: dts: specify the MDC frequency on Layerscape DPAA2 devices
Date
Up until now, the external MDIO controller frequency values relied
either on the default ones out of reset or on those setup by u-boot.
Let's just properly specify the MDC frequency in the DTS so that even
without u-boot's intervention Linux can drive the MDIO bus.

This patch set adds the needed properties on all DPAA2 based SoCs.

Ioana Ciornei (3):
arm64: dts: lx2160a: specify clock frequencies for the MDIO
controllers
arm64: dts: ls1088a: specify clock frequencies for the MDIO
controllers
arm64: dts: ls208xa: specify clock frequencies for the MDIO
controllers

arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 6 ++++++
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 6 ++++++
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 6 ++++++
3 files changed, 18 insertions(+)

--
2.25.1

\
 
 \ /
  Last update: 2022-10-25 16:42    [W:0.195 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site