lkml.org 
[lkml]   [2022]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 1/2] dt-bindings: PCI: xilinx-pcie: Convert to YAML schemas of Xilinx AXI PCIe Root Port Bridge
Date
Hi,
> -----Original Message-----
> From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Sent: Wednesday, October 19, 2022 8:34 PM
> To: Havalige, Thippeswamy <thippeswamy.havalige@amd.com>; linux-
> pci@vger.kernel.org; linux-kernel@vger.kernel.org;
> devicetree@vger.kernel.org; krzysztof.kozlowski+dt@linaro.org
> Cc: bhelgaas@google.com; michals@xilinx.com; robh+dt@kernel.org;
> Gogada, Bharat Kumar <bharat.kumar.gogada@amd.com>
> Subject: Re: [PATCH 1/2] dt-bindings: PCI: xilinx-pcie: Convert to YAML
> schemas of Xilinx AXI PCIe Root Port Bridge
>
> On 19/10/2022 10:46, Thippeswamy Havalige wrote:
> > Convert to YAML dtschemas of Xilinx AXI PCIe Root Port Bridge dt
> > binding.
> >
> > Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
> > ---
> > .../devicetree/bindings/pci/xilinx-pcie.txt | 88 -------------------
> > .../devicetree/bindings/pci/xilinx-pcie.yaml | 81 +++++++++++++++++
> > 2 files changed, 81 insertions(+), 88 deletions(-) delete mode
> > 100644 Documentation/devicetree/bindings/pci/xilinx-pcie.txt
> > create mode 100644
> > Documentation/devicetree/bindings/pci/xilinx-pcie.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
> > b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
> > deleted file mode 100644
> > index fd57a81180a4..000000000000
> > --- a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
> > +++ /dev/null
> > @@ -1,88 +0,0 @@
> > -* Xilinx AXI PCIe Root Port Bridge DT description
> > -
> > -Required properties:
> > -- #address-cells: Address representation for root ports, set to <3>
> > -- #size-cells: Size representation for root ports, set to <2>
> > -- #interrupt-cells: specifies the number of cells needed to encode an
> > - interrupt source. The value must be 1.
> > -- compatible: Should contain "xlnx,axi-pcie-host-1.00.a"
> > -- reg: Should contain AXI PCIe registers location and length
> > -- device_type: must be "pci"
> > -- interrupts: Should contain AXI PCIe interrupt
> > -- interrupt-map-mask,
> > - interrupt-map: standard PCI properties to define the mapping of the
> > - PCI interface to interrupt numbers.
> > -- ranges: ranges for the PCI memory regions (I/O space region is not
> > - supported by hardware)
> > - Please refer to the standard PCI bus binding document for a more
> > - detailed explanation
> > -
> > -Optional properties for Zynq/Microblaze:
> > -- bus-range: PCI bus numbers covered
> > -
> > -Interrupt controller child node
> > -+++++++++++++++++++++++++++++++
> > -Required properties:
> > -- interrupt-controller: identifies the node as an interrupt
> > controller
> > -- #address-cells: specifies the number of cells needed to encode an
> > - address. The value must be 0.
> > -- #interrupt-cells: specifies the number of cells needed to encode an
> > - interrupt source. The value must be 1.
> > -
> > -NOTE:
> > -The core provides a single interrupt for both INTx/MSI messages. So,
> > -created a interrupt controller node to support 'interrupt-map' DT
> > -functionality. The driver will create an IRQ domain for this map,
> > decode -the four INTx interrupts in ISR and route them to this domain.
> > -
> > -
> > -Example:
> > -++++++++
> > -Zynq:
> > - pci_express: axi-pcie@50000000 {
> > - #address-cells = <3>;
> > - #size-cells = <2>;
> > - #interrupt-cells = <1>;
> > - compatible = "xlnx,axi-pcie-host-1.00.a";
> > - reg = < 0x50000000 0x1000000 >;
> > - device_type = "pci";
> > - interrupts = < 0 52 4 >;
> > - interrupt-map-mask = <0 0 0 7>;
> > - interrupt-map = <0 0 0 1 &pcie_intc 1>,
> > - <0 0 0 2 &pcie_intc 2>,
> > - <0 0 0 3 &pcie_intc 3>,
> > - <0 0 0 4 &pcie_intc 4>;
> > - ranges = < 0x02000000 0 0x60000000 0x60000000 0
> 0x10000000 >;
> > -
> > - pcie_intc: interrupt-controller {
> > - interrupt-controller;
> > - #address-cells = <0>;
> > - #interrupt-cells = <1>;
> > - };
> > - };
> > -
> > -
> > -Microblaze:
> > - pci_express: axi-pcie@10000000 {
> > - #address-cells = <3>;
> > - #size-cells = <2>;
> > - #interrupt-cells = <1>;
> > - compatible = "xlnx,axi-pcie-host-1.00.a";
> > - reg = <0x10000000 0x4000000>;
> > - device_type = "pci";
> > - interrupt-parent = <&microblaze_0_intc>;
> > - interrupts = <1 2>;
> > - interrupt-map-mask = <0 0 0 7>;
> > - interrupt-map = <0 0 0 1 &pcie_intc 1>,
> > - <0 0 0 2 &pcie_intc 2>,
> > - <0 0 0 3 &pcie_intc 3>,
> > - <0 0 0 4 &pcie_intc 4>;
> > - ranges = <0x02000000 0x00000000 0x80000000 0x80000000
> 0x00000000 0x10000000>;
> > -
> > - pcie_intc: interrupt-controller {
> > - interrupt-controller;
> > - #address-cells = <0>;
> > - #interrupt-cells = <1>;
> > - };
> > -
> > - };
> > diff --git a/Documentation/devicetree/bindings/pci/xilinx-pcie.yaml
> > b/Documentation/devicetree/bindings/pci/xilinx-pcie.yaml
> > new file mode 100644
> > index 000000000000..6b372ac1763e
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pci/xilinx-pcie.yaml
> > @@ -0,0 +1,81 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/pci/xilinx-pcie.yaml#
>
> Filename based on compatible, so:
> xlnx,axi-pcie-host.yaml
>
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Xilinx AXI PCIe Root Port Bridge DT description
>
> Drop "DT description"
>
> > +
> > +maintainers:
> > + - Thippeswamy Havalige <thippesw@xilinx.com>
> > +
> > +allOf:
> > + - $ref: /schemas/pci/pci-bus.yaml#
> > +
> > +properties:
> > + compatible:
> > + const: xlnx,axi-pcie-host-1.00.a
> > +
> > + reg:
> > + items:
> > + - description: should contain AXI PCIe registers location and
> > + length
>
> Drop description, just maxItems: 1
>
> > +
> > + interrupts:
> > + items:
> > + - description: should contain AXI PCIe interrupt
>
> Ditto
>
>
> > +
> > + ranges:
> > + items:
> > + - description: |
> > + ranges for the PCI memory regions (I/O space region is not
> > + supported by hardware)
> > +
> > + "#interrupt-cells":
> > + const: 1
> > +
> > + interrupt-controller:
> > + description: identifies the node as an interrupt controller
> > + type: object
>
> additionalProperties: false
>
> > + properties:
> > + "interrupt-controller": true
> > + "#address-cells":
> > + const: 0
> > + "#interrupt-cells":
> > + const: 1
>
> Add also required properties for this node.
>
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > + - ranges
> > + - device_type
> > + - interrupt-map
> > + - "#interrupt-cells"
> > + - interrupt-controller
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > + - |
> > +
> > + Zynq:
> > + pci_express: pcie@50000000 {
> > + #address-cells = <3>;
>
> Use 4 spaces for example indentation.
>
> > + #size-cells = <2>;
> > + #interrupt-cells = <1>;
> > + compatible = "xlnx,axi-pcie-host-1.00.a";
> > + reg = < 0x50000000 0x1000000 >;
>
> Fix style.
>
> compatible goes first, then reg, then the rest.
>
> > + device_type = "pci";
> > + interrupts = < 0 52 4 >;
>
> Fix the style, use defines.
>
> > + interrupt-map-mask = <0 0 0 7>;
> > + interrupt-map = <0 0 0 1 &pcie_intc 1>,
> > + <0 0 0 2 &pcie_intc 2>,
> > + <0 0 0 3 &pcie_intc 3>,
> > + <0 0 0 4 &pcie_intc 4>;
> > + ranges = < 0x02000000 0 0x60000000 0x60000000 0
> > + 0x10000000 >;
>
> Original example looked correct, so how did it become with these spaces?
>
> > + pcie_intc: interrupt-controller {
> > + interrupt-controller;
> > + #address-cells = <0>;
> > + #interrupt-cells = <1>;
> > + };
> > + };
>
> Best regards,
> Krzysztof

Thanks for reviewing, I agree with all the recommended changes. I'll send updated patches.

Regards,
Thippeswamy H
\
 
 \ /
  Last update: 2022-10-25 16:07    [W:0.078 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site