lkml.org 
[lkml]   [2022]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/3] watchdog: imx2_wdg: suspend watchdog in WAIT mode
On 22-10-25, Andrej Picej wrote:
> Putting device into the "Suspend-To-Idle" mode causes watchdog to
> trigger and reset the board after set watchdog timeout period elapses.
>
> Introduce new device-tree property "fsl,suspend-in-wait" which suspends
> watchdog in WAIT mode. This is done by setting WDW bit in WCR
> (Watchdog Control Register) Watchdog operation is restored after exiting
> WAIT mode as expected. WAIT mode coresponds with Linux's
> "Suspend-To-Idle".
>
> Signed-off-by: Andrej Picej <andrej.picej@norik.com>
> Reviewed-by: Fabio Estevam <festevam@gmail.com>
> ---
> Changes in v2:
> - validate the property with compatible string, as this functionality
> is not supported by all devices.
> ---
> drivers/watchdog/imx2_wdt.c | 37 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 37 insertions(+)
>
> diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c
> index d0c5d47ddede..dd9866c6f1e5 100644
> --- a/drivers/watchdog/imx2_wdt.c
> +++ b/drivers/watchdog/imx2_wdt.c
> @@ -35,6 +35,7 @@
>
> #define IMX2_WDT_WCR 0x00 /* Control Register */
> #define IMX2_WDT_WCR_WT (0xFF << 8) /* -> Watchdog Timeout Field */
> +#define IMX2_WDT_WCR_WDW BIT(7) /* -> Watchdog disable for WAIT */
> #define IMX2_WDT_WCR_WDA BIT(5) /* -> External Reset WDOG_B */
> #define IMX2_WDT_WCR_SRS BIT(4) /* -> Software Reset Signal */
> #define IMX2_WDT_WCR_WRE BIT(3) /* -> WDOG Reset Enable */
> @@ -67,6 +68,27 @@ struct imx2_wdt_device {
> bool ext_reset;
> bool clk_is_on;
> bool no_ping;
> + bool sleep_wait;
> +};
> +
> +static const char * const wdw_boards[] __initconst = {
> + "fsl,imx25-wdt",
> + "fsl,imx35-wdt",
> + "fsl,imx50-wdt",
> + "fsl,imx51-wdt",
> + "fsl,imx53-wdt",
> + "fsl,imx6q-wdt",
> + "fsl,imx6sl-wdt",
> + "fsl,imx6sll-wdt",
> + "fsl,imx6sx-wdt",
> + "fsl,imx6ul-wdt",
> + "fsl,imx7d-wdt",
> + "fsl,imx8mm-wdt",
> + "fsl,imx8mn-wdt",
> + "fsl,imx8mp-wdt",
> + "fsl,imx8mq-wdt",
> + "fsl,vf610-wdt",
> + NULL
> };

For such things we have the data pointer within the struct of_device_id.

>
> static bool nowayout = WATCHDOG_NOWAYOUT;
> @@ -129,6 +151,9 @@ static inline void imx2_wdt_setup(struct watchdog_device *wdog)
>
> /* Suspend timer in low power mode, write once-only */
> val |= IMX2_WDT_WCR_WDZST;
> + /* Suspend timer in low power WAIT mode, write once-only */
> + if (wdev->sleep_wait)
> + val |= IMX2_WDT_WCR_WDW;
> /* Strip the old watchdog Time-Out value */
> val &= ~IMX2_WDT_WCR_WT;
> /* Generate internal chip-level reset if WDOG times out */
> @@ -313,6 +338,18 @@ static int __init imx2_wdt_probe(struct platform_device *pdev)
>
> wdev->ext_reset = of_property_read_bool(dev->of_node,
> "fsl,ext-reset-output");
> +
> + if (of_property_read_bool(dev->of_node, "fsl,suspend-in-wait"))

Why do we need this special property? If the device has problems when
"freeze" is used as suspend mode and this is fixed by this special bit
then we should enable it if the device supports it.

Regards,
Marco


> + if (of_device_compatible_match(dev->of_node, wdw_boards))
> + wdev->sleep_wait = 1;
> + else {
> + dev_warn(dev, "Warning: Suspending watchdog during " \
> + "WAIT mode is not supported for this device.\n");
> + wdev->sleep_wait = 0;
> + }
> + else
> + wdev->sleep_wait = 0;
> +
> /*
> * The i.MX7D doesn't support low power mode, so we need to ping the watchdog
> * during suspend.
> --
> 2.25.1
>
>
>

\
 
 \ /
  Last update: 2022-10-25 14:29    [W:0.122 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site