lkml.org 
[lkml]   [2022]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH RFC v3 14/22] ata: libata-scsi: Add ata_scsi_setup_sdev()
Date
Add a function to setup the sdev associated with an ata_device.

Currently in libata to create the sdev we call __scsi_add_device() to
create the sdev and execute the scan. However if we want to move to a
2-step process where we allocate the sdev early in the port probe, then
we need a separate function just to allocate the sdev.

We add a ata_port_operations callback .setup_scsi_device for when the
driver needs a custom setup. This is essentially for libsas, which does
not use the same options for sdev parent and id.

Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/ata/libata-scsi.c | 26 ++++++++++++++++++++++++++
drivers/ata/libata.h | 1 +
include/linux/libata.h | 2 ++
3 files changed, 29 insertions(+)

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index e2ebb0b065e2..efdba852e363 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -4253,6 +4253,32 @@ static void ata_scsi_assign_ofnode(struct ata_device *dev, struct ata_port *ap)
}
#endif

+int ata_scsi_setup_sdev(struct ata_device *dev)
+{
+ u64 lun = 0;
+ int channel = 0;
+ uint id = 0;
+ struct ata_link *link = dev->link;
+ struct ata_port *ap = link->ap;
+ struct Scsi_Host *shost = ap->scsi_host;
+ struct device *parent = &shost->shost_gendev;
+ struct scsi_device *sdev;
+
+ if (ap->ops->setup_scsi_device)
+ return ap->ops->setup_scsi_device(dev);
+
+ if (ata_is_host_link(link))
+ id = dev->devno;
+ else
+ channel = link->pmp;
+ sdev = scsi_get_dev(parent, channel, id, lun);
+ if (!sdev)
+ return -ENODEV;
+ dev->sdev = sdev;
+ ata_scsi_assign_ofnode(dev, ap);
+ return 0;
+}
+
void ata_scsi_scan_host(struct ata_port *ap, int sync)
{
int tries = 5;
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 2c5c8273af01..0c2df1e60768 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -112,6 +112,7 @@ extern struct ata_device *ata_scsi_find_dev(struct ata_port *ap,
const struct scsi_device *scsidev);
extern int ata_scsi_add_hosts(struct ata_host *host,
struct scsi_host_template *sht);
+extern int ata_scsi_setup_sdev(struct ata_device *dev);
extern void ata_scsi_scan_host(struct ata_port *ap, int sync);
extern int ata_scsi_offline_dev(struct ata_device *dev);
extern void ata_scsi_set_sense(struct ata_device *dev,
diff --git a/include/linux/libata.h b/include/linux/libata.h
index fe990176e6ee..827d5838cd23 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -968,6 +968,8 @@ struct ata_port_operations {
void (*phy_reset)(struct ata_port *ap);
void (*eng_timeout)(struct ata_port *ap);

+ int (*setup_scsi_device)(struct ata_device *dev);
+
/*
* ->inherits must be the last field and all the preceding
* fields must be pointers.
--
2.35.3
\
 
 \ /
  Last update: 2022-10-25 11:52    [W:0.343 / U:1.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site