lkml.org 
[lkml]   [2022]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 net-next 2/7] dt-bindings: mfd: ocelot: remove unnecessary driver wording
Date
Initially there was unnecessary verbage around "this driver" in the
documentation. It was unnecessary. Remove self references about it being a
"driver" documentation and replace it with a more detailed description
about external interfaces that are supported.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml b/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml
index c6da91211a18..1d1fee1a16c1 100644
--- a/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml
+++ b/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml
@@ -12,7 +12,8 @@ maintainers:
description: |
The Ocelot ethernet switch family contains chips that have an internal CPU
(VSC7513, VSC7514) and chips that don't (VSC7511, VSC7512). All switches have
- the option to be controlled externally, which is the purpose of this driver.
+ the option to be controlled externally via external interfaces like SPI or
+ PCIe.

The switch family is a multi-port networking switch that supports many
interfaces. Additionally, the device can perform pin control, MDIO buses, and
--
2.25.1
\
 
 \ /
  Last update: 2022-10-25 07:05    [W:2.664 / U:0.600 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site