lkml.org 
[lkml]   [2022]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] usb: gadget: aspeed: fix buffer overflow
From
Date
On Tue, 2022-10-25 at 14:21 +0800, Lei Yu wrote:
>

> This case is treated as an error and we do not care about the
> following data.
> Similarly, if we change the MTU in BMC and let BMC ping the OS, the
> OS
> kernel does not crash and it gets RX errors, and the ping fails.
>
>  # ifconfig usb0
>  usb0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
>          ...
>          RX packets 85  bytes 15380 (15.0 KiB)
>          RX errors 51  dropped 0  overruns 0  frame 51
>
> With this patch, we get the similar behavior on BMC that the RX
> errors
> are increasing.
>
> > Additionally, I'm curious, why in this specific case is the device
> > sending more data than
> > the buffer can hold ? The MTU change should have resulted in
> > buffers being re-allocated no ?
>
> The issue is found in a rare case during BIOS boot, we assume that
> BIOS is sending unexpected data to BMC for unknown reasons.

Ok thanks.

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>


> > Or did you change the MTU on the remote and not on the local device
> > ?
> >
>
> Yes, the MTU is changed to 2000 in OS and kept 1500 on BMC, then the
> issue is reproduced. (see detailed steps in the above email).
>
> The reason we made the above test is because we are trying to
> reproduce the behavior as BIOS, and from the logs it looks like it's
> sending a packet larger than MTU. Then we tried to adjust the MTU on
> the OS side and reproduced the issue.

\
 
 \ /
  Last update: 2022-10-26 00:37    [W:0.152 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site