lkml.org 
[lkml]   [2022]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 5/8] agp/nvidia: Convert to generic power management
Date
From: Bjorn Helgaas <bhelgaas@google.com>

Convert agpgart-nvidia from legacy PCI power management to the generic
power management framework.

Previously agpgart-nvidia used legacy PCI power management, and
agp_nvidia_suspend() and agp_nvidia_resume() were responsible for both
device-specific things and generic PCI things:

agp_nvidia_suspend
pci_save_state <-- generic PCI
pci_set_power_state(PCI_D3hot) <-- generic PCI

agp_nvidia_resume
pci_set_power_state(PCI_D0) <-- generic PCI
pci_restore_state <-- generic PCI
nvidia_configure <-- device-specific

Convert to generic power management where the PCI bus PM methods do the
generic PCI things, and the driver needs only the device-specific part,
i.e.,

suspend_devices_and_enter
dpm_suspend_start(PMSG_SUSPEND)
pci_pm_suspend # PCI bus .suspend() method
agp_nvidia_suspend <-- not needed at all; removed
suspend_enter
dpm_suspend_noirq(PMSG_SUSPEND)
pci_pm_suspend_noirq # PCI bus .suspend_noirq() method
pci_save_state <-- generic PCI
pci_prepare_to_sleep <-- generic PCI
pci_set_power_state
...
dpm_resume_end(PMSG_RESUME)
pci_pm_resume # PCI bus .resume() method
pci_restore_standard_config
pci_set_power_state(PCI_D0) <-- generic PCI
pci_restore_state <-- generic PCI
agp_nvidia_resume # driver->pm->resume
nvidia_configure <-- device-specific

Based on 0aeddbd0cb07 ("via-agp: convert to generic power management") by
Vaibhav Gupta <vaibhavgupta40@gmail.com>.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
drivers/char/agp/nvidia-agp.c | 24 ++++--------------------
1 file changed, 4 insertions(+), 20 deletions(-)

diff --git a/drivers/char/agp/nvidia-agp.c b/drivers/char/agp/nvidia-agp.c
index 826dbd06f6bb..dbcbc06cc202 100644
--- a/drivers/char/agp/nvidia-agp.c
+++ b/drivers/char/agp/nvidia-agp.c
@@ -404,28 +404,13 @@ static void agp_nvidia_remove(struct pci_dev *pdev)
agp_put_bridge(bridge);
}

-#ifdef CONFIG_PM
-static int agp_nvidia_suspend(struct pci_dev *pdev, pm_message_t state)
+static int agp_nvidia_resume(struct device *dev)
{
- pci_save_state(pdev);
- pci_set_power_state(pdev, PCI_D3hot);
-
- return 0;
-}
-
-static int agp_nvidia_resume(struct pci_dev *pdev)
-{
- /* set power state 0 and restore PCI space */
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
-
/* reconfigure AGP hardware again */
nvidia_configure();

return 0;
}
-#endif
-

static const struct pci_device_id agp_nvidia_pci_table[] = {
{
@@ -449,15 +434,14 @@ static const struct pci_device_id agp_nvidia_pci_table[] = {

MODULE_DEVICE_TABLE(pci, agp_nvidia_pci_table);

+static DEFINE_SIMPLE_DEV_PM_OPS(agp_nvidia_pm_ops, NULL, agp_nvidia_resume);
+
static struct pci_driver agp_nvidia_pci_driver = {
.name = "agpgart-nvidia",
.id_table = agp_nvidia_pci_table,
.probe = agp_nvidia_probe,
.remove = agp_nvidia_remove,
-#ifdef CONFIG_PM
- .suspend = agp_nvidia_suspend,
- .resume = agp_nvidia_resume,
-#endif
+ .driver.pm = &agp_nvidia_pm_ops,
};

static int __init agp_nvidia_init(void)
--
2.25.1
\
 
 \ /
  Last update: 2022-10-25 22:40    [W:0.600 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site