lkml.org 
[lkml]   [2022]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 03/11] thermal: k3_j72xx_bandgap: remove fuse_base from structure
Date
'fuse_base' is only needed during the initial probe function to provide
a software trimming method for some devices effected by TI's i2128
erratum. Not all devices that use this hardware device will need to map
this eFuse region.

Remove fuse_base from the main k3_j72xx_bandgap structure

Signed-off-by: Bryan Brattlof <bb@ti.com>
---
drivers/thermal/k3_j72xx_bandgap.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)

diff --git a/drivers/thermal/k3_j72xx_bandgap.c b/drivers/thermal/k3_j72xx_bandgap.c
index b9d20026771a5..71bf65e6afaed 100644
--- a/drivers/thermal/k3_j72xx_bandgap.c
+++ b/drivers/thermal/k3_j72xx_bandgap.c
@@ -177,7 +177,6 @@ struct k3_j72xx_bandgap {
struct device *dev;
void __iomem *base;
void __iomem *cfg2_base;
- void __iomem *fuse_base;
struct k3_thermal_data *ts_data[K3_VTM_MAX_NUM_TS];
};

@@ -276,7 +275,7 @@ static int k3_j72xx_bandgap_temp_to_adc_code(int temp)
}

static void get_efuse_values(int id, struct k3_thermal_data *data, int *err,
- struct k3_j72xx_bandgap *bgp)
+ void __iomem *fuse_base)
{
int i, tmp, pow;
int ct_offsets[5][K3_VTM_CORRECTION_TEMP_CNT] = {
@@ -298,16 +297,16 @@ static void get_efuse_values(int id, struct k3_thermal_data *data, int *err,
/* Extract the offset value using bit-mask */
if (ct_offsets[id][i] == -1 && i == 1) {
/* 25C offset Case of Sensor 2 split between 2 regs */
- tmp = (readl(bgp->fuse_base + 0x8) & 0xE0000000) >> (29);
- tmp |= ((readl(bgp->fuse_base + 0xC) & 0x1F) << 3);
+ tmp = (readl(fuse_base + 0x8) & 0xE0000000) >> (29);
+ tmp |= ((readl(fuse_base + 0xC) & 0x1F) << 3);
pow = tmp & 0x80;
} else if (ct_offsets[id][i] == -1 && i == 2) {
/* 125C Case of Sensor 3 split between 2 regs */
- tmp = (readl(bgp->fuse_base + 0x4) & 0xF8000000) >> (27);
- tmp |= ((readl(bgp->fuse_base + 0x8) & 0xF) << 5);
+ tmp = (readl(fuse_base + 0x4) & 0xF8000000) >> (27);
+ tmp |= ((readl(fuse_base + 0x8) & 0xF) << 5);
pow = tmp & 0x100;
} else {
- tmp = readl(bgp->fuse_base + ct_offsets[id][i]);
+ tmp = readl(fuse_base + ct_offsets[id][i]);
tmp &= ct_bm[id][i];
tmp = tmp >> __ffs(ct_bm[id][i]);

@@ -356,6 +355,7 @@ static int k3_j72xx_bandgap_probe(struct platform_device *pdev)
struct thermal_zone_device *ti_thermal;
int *ref_table;
struct err_values err_vals;
+ void __iomem *fuse_base;

const s64 golden_factors[] = {
-490019999999999936,
@@ -387,9 +387,9 @@ static int k3_j72xx_bandgap_probe(struct platform_device *pdev)
return PTR_ERR(bgp->cfg2_base);

res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
- bgp->fuse_base = devm_ioremap_resource(dev, res);
- if (IS_ERR(bgp->fuse_base))
- return PTR_ERR(bgp->fuse_base);
+ fuse_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(fuse_base))
+ return PTR_ERR(fuse_base);

driver_data = of_device_get_match_data(dev);
if (driver_data)
@@ -428,7 +428,7 @@ static int k3_j72xx_bandgap_probe(struct platform_device *pdev)
}

/* Workaround not needed if bit30/bit31 is set even for J721e */
- if (workaround_needed && (readl(bgp->fuse_base + 0x0) & 0xc0000000) == 0xc0000000)
+ if (workaround_needed && (readl(fuse_base + 0x0) & 0xc0000000) == 0xc0000000)
workaround_needed = false;

dev_dbg(bgp->dev, "Work around %sneeded\n",
@@ -452,7 +452,7 @@ static int k3_j72xx_bandgap_probe(struct platform_device *pdev)
err_vals.refs[1] = PLUS30CREF;
err_vals.refs[2] = PLUS125CREF;
err_vals.refs[3] = PLUS150CREF;
- get_efuse_values(id, &data[id], err_vals.errs, bgp);
+ get_efuse_values(id, &data[id], err_vals.errs, fuse_base);
}

if (id == 0 && workaround_needed)
@@ -501,6 +501,9 @@ static int k3_j72xx_bandgap_probe(struct platform_device *pdev)
*/
kfree(ref_table);

+ if (workaround_needed)
+ devm_iounmap(dev, fuse_base);
+
return 0;

err_free_ref_table:
--
2.38.1
\
 
 \ /
  Last update: 2022-10-25 21:17    [W:3.027 / U:0.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site