lkml.org 
[lkml]   [2022]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] thermal: qcom-spmi-temp-alarm: Log the actual max stage 2 threshold
Date
If the critical trip point of the thermal zone is higher than
the max threshold of the PMIC log the actual max threshold of the
chip, not the gen1 max threshold of 140°C.

Reported-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
---

drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
index be785ab37e53..bdfe2129c357 100644
--- a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
+++ b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
@@ -252,7 +252,8 @@ static int qpnp_tm_update_critical_trip_temp(struct qpnp_tm_chip *chip,
disable_s2_shutdown = true;
else
dev_warn(chip->dev,
- "No ADC is configured and critical temperature is above the maximum stage 2 threshold of 140 C! Configuring stage 2 shutdown at 140 C.\n");
+ "No ADC is configured and critical temperature is above the maximum stage 2 threshold of %d C! Configuring stage 2 shutdown at %d C.\n",
+ stage2_threshold_max / 1000, stage2_threshold_max / 1000);
}

skip:
--
2.38.0.135.g90850a2211-goog
\
 
 \ /
  Last update: 2022-10-25 19:16    [W:0.046 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site