lkml.org 
[lkml]   [2022]   [Oct]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v3 3/4] vdpa: show dev config as-is in "vdpa dev show" output
From


On 10/24/2022 1:40 AM, Jason Wang wrote:
> On Sat, Oct 22, 2022 at 7:49 AM Si-Wei Liu <si-wei.liu@oracle.com> wrote:
>> Live migration of vdpa would typically require re-instate vdpa
>> device with an idential set of configs on the destination node,
>> same way as how source node created the device in the first
>> place. In order to save orchestration software from memorizing
>> and keeping track of vdpa config, it will be helpful if the vdpa
>> tool provides the aids for exporting the initial configs as-is,
>> the way how vdpa device was created. The "vdpa dev show" command
>> seems to be the right vehicle for that. It is unlike the "vdpa dev
>> config show" command output which usually goes with the live value
>> in the device config space, and is not quite reliable subject to
>> the dynamics of feature negotiation or possible change by the
>> driver to the config space.
>>
>> Examples:
>>
>> 1) Create vDPA by default without any config attribute
>>
>> $ vdpa dev add mgmtdev pci/0000:41:04.2 name vdpa0
>> $ vdpa dev show vdpa0
>> vdpa0: type network mgmtdev pci/0000:41:04.2 vendor_id 5555 max_vqs 9 max_vq_size 256
>> $ vdpa dev -jp show vdpa0
>> {
>> "dev": {
>> "vdpa0": {
>> "type": "network",
>> "mgmtdev": "pci/0000:41:04.2",
>> "vendor_id": 5555,
>> "max_vqs": 9,
>> "max_vq_size": 256,
>> }
>> }
>> }
>>
>> 2) Create vDPA with config attribute(s) specified
>>
>> $ vdpa dev add mgmtdev pci/0000:41:04.2 name vdpa0 \
>> mac e4:11:c6:d3:45:f0 max_vq_pairs 4
>> $ vdpa dev show
>> vdpa0: type network mgmtdev pci/0000:41:04.2 vendor_id 5555 max_vqs 9 max_vq_size 256
>> initial_config: mac e4:11:c6:d3:45:f0 max_vq_pairs 4
>> $ vdpa dev -jp show
>> {
>> "dev": {
>> "vdpa0": {
>> "type": "network",
>> "mgmtdev": "pci/0000:41:04.2",
>> "vendor_id": 5555,
>> "max_vqs": 9,
>> "max_vq_size": 256,
>> "initial_config": {
>> "mac": "e4:11:c6:d3:45:f0",
>> "max_vq_pairs": 4
>> }
>> }
>> }
>> }
>>
>> Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
>> ---
>> drivers/vdpa/vdpa.c | 39 +++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 39 insertions(+)
>>
>> diff --git a/drivers/vdpa/vdpa.c b/drivers/vdpa/vdpa.c
>> index bebded6..bfb8f54 100644
>> --- a/drivers/vdpa/vdpa.c
>> +++ b/drivers/vdpa/vdpa.c
>> @@ -677,6 +677,41 @@ static int vdpa_nl_cmd_dev_del_set_doit(struct sk_buff *skb, struct genl_info *i
>> }
>>
>> static int
>> +vdpa_dev_initcfg_fill(struct vdpa_device *vdev, struct sk_buff *msg, u32 device_id)
>> +{
>> + struct vdpa_dev_set_config *cfg = &vdev->init_cfg;
>> + int err = -EMSGSIZE;
>> +
>> + if (!cfg->mask)
>> + return 0;
>> +
>> + switch (device_id) {
>> + case VIRTIO_ID_NET:
>> + if ((cfg->mask & BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MACADDR)) != 0 &&
>> + nla_put(msg, VDPA_ATTR_DEV_NET_CFG_MACADDR,
>> + sizeof(cfg->net.mac), cfg->net.mac))
>> + return err;
>> + if ((cfg->mask & BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MTU)) != 0 &&
>> + nla_put_u16(msg, VDPA_ATTR_DEV_NET_CFG_MTU, cfg->net.mtu))
>> + return err;
>> + if ((cfg->mask & BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MAX_VQP)) != 0 &&
>> + nla_put_u16(msg, VDPA_ATTR_DEV_NET_CFG_MAX_VQP,
>> + cfg->net.max_vq_pairs))
>> + return err;
>> + break;
>> + default:
>> + break;
>> + }
>> +
>> + if ((cfg->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) != 0 &&
>> + nla_put_u64_64bit(msg, VDPA_ATTR_DEV_FEATURES,
>> + cfg->device_features, VDPA_ATTR_PAD))
>> + return err;
> A question: If any of those above attributes were not provisioned,
> should we show the ones that are inherited from the parent?
A simple answer would be yes, but the long answer is that I am not sure
if there's any for the moment - there's no  default value for mtu, mac,
and max_vqp that can be inherited from the parent (max_vqp by default
being 1 is spec defined, not something inherited from the parent). And
the device_features if inherited is displayed at 'vdpa dev config show'
output. Can you remind me of a good example for inherited value that we
may want to show here?


Thanks,
-Siwei


>
> Thanks
>
>> +
>> + return 0;
>> +}
>> +
>> +static int
>> vdpa_dev_fill(struct vdpa_device *vdev, struct sk_buff *msg, u32 portid, u32 seq,
>> int flags, struct netlink_ext_ack *extack)
>> {
>> @@ -715,6 +750,10 @@ static int vdpa_nl_cmd_dev_del_set_doit(struct sk_buff *skb, struct genl_info *i
>> if (nla_put_u16(msg, VDPA_ATTR_DEV_MIN_VQ_SIZE, min_vq_size))
>> goto msg_err;
>>
>> + err = vdpa_dev_initcfg_fill(vdev, msg, device_id);
>> + if (err)
>> + goto msg_err;
>> +
>> genlmsg_end(msg, hdr);
>> return 0;
>>
>> --
>> 1.8.3.1
>>

\
 
 \ /
  Last update: 2022-10-25 00:30    [W:0.146 / U:1.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site