lkml.org 
[lkml]   [2022]   [Oct]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] clk: imx8mp: register driver at arch_initcall time
From
On 24/10/2022 16.00, Ahmad Fatoum wrote:
> Hello Rasmus,
>
> On 24.10.22 15:48, Rasmus Villemoes wrote:
>> On 28/09/2022 14.41, Rasmus Villemoes wrote:
>>> We have an imx8mp-based board with an external gpio-triggered
>>> watchdog. Currently, we don't get to handle that in time before it
>>> resets the board.
>>>
>>> The probe of the watchdog device gets deferred because the SOC's GPIO
>>> controller is not yet ready, and the probe of that in turn gets deferred
>>> because its clock provider (namely, this driver) is not yet
>>> ready. Altogether, the watchdog does not get handled until the late
>>> initcall deferred_probe_initcall has made sure all leftover devices
>>> have been probed, and that's way too late.
>>>
>>> Aside from being necessary for our board, this also reduces total boot
>>> time because fewer device probes get deferred.
>>
>> ping
>
> Module build is unaffected, because arch_initcall expands to module_init
> if it's built as a module, right?

Yes.

Noting that in the commit message would
> be good I think.
>
> Also, did you try booting with fw_devlink=on? This should have resolved
> your issue too. Not sure what other issues it may cause on i.MX8MP.

AFAICT, that's the default behaviour:

drivers/base/core.c:static u32 fw_devlink_flags = FW_DEVLINK_FLAGS_ON;
drivers/base/core.c-static int __init fw_devlink_setup(char *arg)
drivers/base/core.c-{
drivers/base/core.c- if (!arg)
drivers/base/core.c- return -EINVAL;
drivers/base/core.c-
drivers/base/core.c- if (strcmp(arg, "off") == 0) {
drivers/base/core.c: fw_devlink_flags = 0;
drivers/base/core.c- } else if (strcmp(arg, "permissive") == 0) {
drivers/base/core.c: fw_devlink_flags =
FW_DEVLINK_FLAGS_PERMISSIVE;
drivers/base/core.c- } else if (strcmp(arg, "on") == 0) {
drivers/base/core.c: fw_devlink_flags = FW_DEVLINK_FLAGS_ON;
drivers/base/core.c- } else if (strcmp(arg, "rpm") == 0) {
drivers/base/core.c: fw_devlink_flags = FW_DEVLINK_FLAGS_RPM;
drivers/base/core.c- }
drivers/base/core.c- return 0;
drivers/base/core.c-}
drivers/base/core.c-early_param("fw_devlink", fw_devlink_setup);

But I don't think the problem is that the driver core has inferred the
dependency chain upfront from parsing DT; the problem is simply that we
end up probing the clock controller, and hence all dependencies too late.

Rasmus

\
 
 \ /
  Last update: 2022-10-24 21:15    [W:0.064 / U:1.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site