lkml.org 
[lkml]   [2022]   [Oct]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/3] iio: pressure: ms5611: changed hardcoded SPI speed to value limited
Hi Jonathan,

On Sun, Oct 23, 2022 at 12:12:22PM +0100, Jonathan Cameron wrote:
> On Fri, 21 Oct 2022 17:32:21 +0200
> Marcus Folkesson <marcus.folkesson@gmail.com> wrote:
>
> > Hi Mitja,
> >
> > On Fri, Oct 21, 2022 at 03:58:21PM +0200, Mitja Spes wrote:
> > > Don't hardcode the ms5611 SPI speed, limit it instead.
> > >
> > > Signed-off-by: Mitja Spes <mitja@lxnav.com>
> > > ---
> > > drivers/iio/pressure/ms5611_spi.c | 2 +-
> > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/iio/pressure/ms5611_spi.c b/drivers/iio/pressure/ms5611_spi.c
> > > index 432e912096f4..a0a7205c9c3a 100644
> > > --- a/drivers/iio/pressure/ms5611_spi.c
> > > +++ b/drivers/iio/pressure/ms5611_spi.c
> > > @@ -91,7 +91,7 @@ static int ms5611_spi_probe(struct spi_device *spi)
> > > spi_set_drvdata(spi, indio_dev);
> > >
> > > spi->mode = SPI_MODE_0;
> > > - spi->max_speed_hz = 20000000;
> > > + spi->max_speed_hz = min(spi->max_speed_hz, 20000000U);
> >
> > max_speed_hz is a limit, and the max frequency the ms5611 support is
> > 20MHz.
> Hi Marcus,
>
> I'm not following what you are commenting on.. Perhaps give more
> detail?

Sorry for being unclear.
However, I must have thought wrong, this is good as it takes the speedlimit set
in e.g. devicetree into account.


>
> Thanks,
>
> Jonathan
>
> >
> > Best regards,
> > Marcus Folkesson
>

Best regards,
Marcus Folkesson
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2022-10-24 11:07    [W:0.069 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site