lkml.org 
[lkml]   [2022]   [Oct]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 0/5] arm: dts: colibri-imx6: usb dual-role switching et. al.
On Wed, Sep 28, 2022 at 09:33:31AM +0200, Marcel Ziswiler wrote:
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
>
> This series is an assortment of USB dual-role specific commits as
> follows:
>
> Introduce USBC_DET GPIO based USB dual-role aka device/host switching.
>
> Move USB VBUS supply from single carrier board to module level device
> tree. This pin is as per Colibri module family standard.
>
> Specify USBH_PEN GPIO being active-low rather than active-high
> (cosmetic only).
>
> Remove spurious debounce property from linux,extcon-usb-gpio. That
> commit is actually for Colibri iMX7.
>
> Changes in v2:
> - Dropped fixes tag as this change is rather cosmetic.
> - Add new commit also actually enabling CONFIG_EXTCON_USB_GPIO.
>
> Marcel Ziswiler (4):
> arm: dts: colibri-imx6: move vbus-supply to module level device tree
> arm: dts: colibri-imx6: specify usbh_pen gpio being active-low
> arm: dts: imx7-colibri: remove spurious debounce property
> ARM: imx_v6_v7_defconfig: Enable USB GPIO extcon support
>
> Philippe Schenker (1):
> arm: dts: colibri-imx6: usb dual-role switching

We idiomatically use prefix 'ARM: dts: ...' for i.MX arm DTS. Fixed
them up and applied the series.

Shawn

\
 
 \ /
  Last update: 2022-10-24 09:45    [W:0.055 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site