lkml.org 
[lkml]   [2022]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 10/21] mmc: remove s3cmci driver
Date
From: Arnd Bergmann <arnd@arndb.de>

The s3c24xx platform is gone, so this driver can be removed as well.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
MAINTAINERS | 6 -
drivers/mmc/host/Kconfig | 43 -
drivers/mmc/host/Makefile | 1 -
drivers/mmc/host/s3cmci.c | 1777 ----------------------
drivers/mmc/host/s3cmci.h | 75 -
include/linux/platform_data/mmc-s3cmci.h | 51 -
6 files changed, 1953 deletions(-)
delete mode 100644 drivers/mmc/host/s3cmci.c
delete mode 100644 drivers/mmc/host/s3cmci.h
delete mode 100644 include/linux/platform_data/mmc-s3cmci.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 2caf42b0328a..503ebd9800db 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17920,12 +17920,6 @@ S: Supported
W: http://www.ibm.com/developerworks/linux/linux390/
F: drivers/s390/scsi/zfcp_*

-S3C24XX SD/MMC Driver
-M: Ben Dooks <ben-linux@fluff.org>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Supported
-F: drivers/mmc/host/s3cmci.*
-
SAA6588 RDS RECEIVER DRIVER
M: Hans Verkuil <hverkuil@xs4all.nl>
L: linux-media@vger.kernel.org
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 79d8ddf1f616..75e8c364243d 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -619,49 +619,6 @@ config MMC_SPI

If unsure, or if your system has no SPI master driver, say N.

-config MMC_S3C
- tristate "Samsung S3C SD/MMC Card Interface support"
- depends on ARCH_S3C24XX || COMPILE_TEST
- depends on S3C24XX_DMAC || COMPILE_TEST
- help
- This selects a driver for the MCI interface found in
- Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs.
- If you have a board based on one of those and a MMC/SD
- slot, say Y or M here.
-
- If unsure, say N.
-
-config MMC_S3C_HW_SDIO_IRQ
- bool "Hardware support for SDIO IRQ"
- depends on MMC_S3C
- help
- Enable the hardware support for SDIO interrupts instead of using
- the generic polling code.
-
-choice
- prompt "Samsung S3C SD/MMC transfer code"
- depends on MMC_S3C
-
-config MMC_S3C_PIO
- bool "Use PIO transfers only"
- help
- Use PIO to transfer data between memory and the hardware.
-
- PIO is slower than DMA as it requires CPU instructions to
- move the data. This has been the traditional default for
- the S3C MCI driver.
-
-config MMC_S3C_DMA
- bool "Use DMA transfers only"
- help
- Use DMA to transfer data between memory and the hardware.
-
- Currently, the DMA support in this driver seems to not be
- working properly and needs to be debugged before this
- option is useful.
-
-endchoice
-
config MMC_SDRICOH_CS
tristate "MMC/SD driver for Ricoh Bay1Controllers"
depends on PCI && PCMCIA
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 0baeb0b004f7..885e19e21e75 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -34,7 +34,6 @@ obj-$(CONFIG_MMC_MVSDIO) += mvsdio.o
obj-$(CONFIG_MMC_DAVINCI) += davinci_mmc.o
obj-$(CONFIG_MMC_SPI) += mmc_spi.o
obj-$(CONFIG_MMC_SPI) += of_mmc_spi.o
-obj-$(CONFIG_MMC_S3C) += s3cmci.o
obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o
obj-$(CONFIG_MMC_TMIO_CORE) += tmio_mmc_core.o
obj-$(CONFIG_MMC_SDHI) += renesas_sdhi_core.o
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
deleted file mode 100644
index 8d5929a32d34..000000000000
diff --git a/drivers/mmc/host/s3cmci.h b/drivers/mmc/host/s3cmci.h
deleted file mode 100644
index 8b65d7ad9f97..000000000000
diff --git a/include/linux/platform_data/mmc-s3cmci.h b/include/linux/platform_data/mmc-s3cmci.h
deleted file mode 100644
index bacb86db3112..000000000000
--
2.29.2
\
 
 \ /
  Last update: 2022-10-21 22:48    [W:0.342 / U:1.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site