Messages in this thread Patch in this message | | | From | Georgi Vlaev <> | Subject | [RESEND PATCH] firmware: ti_sci: Fix polled mode during system suspend | Date | Fri, 21 Oct 2022 21:57:04 +0300 |
| |
Commit b9e8a7d950ff ("firmware: ti_sci: Switch transport to polled mode during system suspend") uses read_poll_timeout_atomic() macro in ti_sci_do_xfer() to wait for completion when the system is suspending. The break condition of the macro is set to "true" which will cause it break immediately when evaluated, likely before the TISCI xfer is completed, and always return 0. We want to poll here until "done_state == true".
1) Change the break condition of read_poll_timeout_atomic() to the bool variable "done_state".
2) The read_poll_timeout_atomic() returns 0 if the break condition is met or -ETIMEDOUT if not. Since our break condition has changed to "done_state", we also don't have to check for "!done_state" when evaluating the return value.
Fixes: b9e8a7d950ff ("firmware: ti_sci: Switch transport to polled mode during system suspend")
Signed-off-by: Georgi Vlaev <g-vlaev@ti.com> --- drivers/firmware/ti_sci.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c index ebc32bbd9b83..6281e7153b47 100644 --- a/drivers/firmware/ti_sci.c +++ b/drivers/firmware/ti_sci.c @@ -429,15 +429,14 @@ static inline int ti_sci_do_xfer(struct ti_sci_info *info, * during noirq phase, so we must manually poll the completion. */ ret = read_poll_timeout_atomic(try_wait_for_completion, done_state, - true, 1, + done_state, 1, info->desc->max_rx_timeout_ms * 1000, false, &xfer->done); } - if (ret == -ETIMEDOUT || !done_state) { + if (ret == -ETIMEDOUT) dev_err(dev, "Mbox timedout in resp(caller: %pS)\n", (void *)_RET_IP_); - } /* * NOTE: we might prefer not to need the mailbox ticker to manage the base-commit: 4d48f589d294ddc5e01d3b0dc7cecc55324c05ca -- 2.30.2
| |