lkml.org 
[lkml]   [2022]   [Oct]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/5] cxl/acpi: Set ACPI's CXL _OSC to indicate CXL1.1 support
Date
ACPI includes a CXL _OSC support method to communicate the available
CXL support to FW. The CXL support _OSC includes a field to indicate
CXL1.1 RCH RCD support. The OS sets this bit to 1 if it supports access
to RCD and RCH Port registers.[1] FW can potentially change it's operation
depending on the _OSC support setting reported by the OS.

The ACPI driver does not currently set the ACPI _OSC support to indicate
CXL1.1 RCD RCH support. Change the capability reported to include CXL1.1.

[1] CXL3.0 Table 9-26 'Interpretation of CXL _OSC Support Field'

Signed-off-by: Terry Bowman <terry.bowman@amd.com>
---
drivers/acpi/pci_root.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index c8385ef54c37..094a59b216ae 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -492,6 +492,7 @@ static u32 calculate_cxl_support(void)
u32 support;

support = OSC_CXL_2_0_PORT_DEV_REG_ACCESS_SUPPORT;
+ support |= OSC_CXL_1_1_PORT_REG_ACCESS_SUPPORT;
if (pci_aer_available())
support |= OSC_CXL_PROTOCOL_ERR_REPORTING_SUPPORT;
if (IS_ENABLED(CONFIG_HOTPLUG_PCI_PCIE))
--
2.34.1
\
 
 \ /
  Last update: 2022-10-21 20:57    [W:1.102 / U:0.644 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site