lkml.org 
[lkml]   [2022]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 2/3] arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs
From
On 19/10/2022 16:21, Melody Olvera wrote:
>
>
> On 10/15/2022 6:28 AM, Krzysztof Kozlowski wrote:
>> On 14/10/2022 18:11, Melody Olvera wrote:
>>> Add the base DTSI files for QDU1000 and QRU1000 SoCs, including base
>>> descriptions of CPUs, GCC, RPMHCC, QUP, TLMM, and interrupt-controller
>>> to boot to shell with console on these SoCs.
>>>
>>> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
>>> ---
>>> arch/arm64/boot/dts/qcom/qdu1000.dtsi | 1646 +++++++++++++++++++++++++
>>> arch/arm64/boot/dts/qcom/qru1000.dtsi | 27 +
>>> 2 files changed, 1673 insertions(+)
>>> create mode 100644 arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>> create mode 100644 arch/arm64/boot/dts/qcom/qru1000.dtsi
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>> new file mode 100644
>>> index 000000000000..777734b30f56
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
>>> @@ -0,0 +1,1646 @@
>>> +// SPDX-License-Identifier: BSD-3-Clause
>>> +/*
>>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>>> + */
>>> +
>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>> +#include <dt-bindings/clock/qcom,gcc-qdu1000.h>
>>> +#include <dt-bindings/clock/qcom,rpmh.h>
>>> +#include <dt-bindings/dma/qcom-gpi.h>
>>> +#include <dt-bindings/interconnect/qcom,qdu1000.h>
>>> +#include <dt-bindings/power/qcom-rpmpd.h>
>>> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
>>> +
>>> +/ {
>>> + interrupt-parent = <&intc>;
>>> +
>>> + #address-cells = <2>;
>>> + #size-cells = <2>;
>>> +
>>> + chosen: chosen { };
>>> +
>>> + clocks {
>>> + xo_board: xo-board {
>>> + compatible = "fixed-clock";
>>> + clock-frequency = <19200000>;
>> Both clocks are not a property of a SoC. They are provided by the board,
>> so they should either be defined by board DTS or at least their
>> frequency must be provided by the board.
> That doesn't seem in keeping with precedent.... the sm8* series all have the clocks in
> the dtsi. These are common to the boards anyways.

Because people do not pay attention what is part of SoC, what is part of
board. DTSI is for the SoC and these are inputs to the SoC.

We had these talks and my recommendation is the same.

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-10-20 14:41    [W:0.083 / U:1.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site