lkml.org 
[lkml]   [2022]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH stable-5.15 3/3] usb: dwc3: disable USB core PHY management
Hi Johan,

On 2022-10-19 10:59, Johan Hovold wrote:
> On Tue, Oct 18, 2022 at 05:27:24PM +0200, Stefan Agner wrote:
>> Hi Johan,
>>
>> On 2022-09-06 14:07, Johan Hovold wrote:
>> > From: Johan Hovold <johan+linaro@kernel.org>
>> >
>> > commit 6000b8d900cd5f52fbcd0776d0cc396e88c8c2ea upstream.
>> >
>> > The dwc3 driver manages its PHYs itself so the USB core PHY management
>> > needs to be disabled.
>> >
>> > Use the struct xhci_plat_priv hack added by commits 46034a999c07 ("usb:
>> > host: xhci-plat: add platform data support") and f768e718911e ("usb:
>> > host: xhci-plat: add priv quirk for skip PHY initialization") to
>> > propagate the setting for now.
>>
>> [adding also Samsung/ODROID device tree authors Krzysztof and Marek]
>>
>> For some reason, this commit seems to break detection of the USB to
>> S-ATA controller on ODROID-HC1 devices (Exynos 5422).
>>
>> We have a known to work OS release of v5.15.60, and known to not be
>> working of v5.15.67. By reverting suspicious commits, I was able to
>> pinpoint the problem to this particular commit.
>>
>> From what I understand, on that particular hardware the S-ATA controller
>> power is controlled via the V-BUS signal VBUSCTRL_U2 (Schematic [1]).
>> Presumably this signal is no longer controlled with this change.
>>
>> This came up in our HAOS issue #2153 [2].
>
> Thanks for the report and sorry about the breakage. This wasn't supposed
> to go to stable but Greg thought otherwise (and I helped with the
> backporting to prevent autosel from pulling in even more changes).
>
> But at least this way we found out sooner that this platform depends on
> having both USB core and dwc3 managing the same PHY.
>
> I think this may be related to the calibration calls added to dwc3 and
> later removed again by commits:
>
> d8c80bb3b55b ("phy: exynos5-usbdrd: Calibrate LOS levels for exynos5420/5800")
> a0a465569b45 ("usb: dwc3: remove generic PHY calibrate() calls")
>
> The removal explicitly mentions that the expectation is that USB core
> will do the PHY calibration.
>
> There could be other changes in the sequencing of events that this
> platform has been implicitly relying on, but as a start, could try
> adding the missing calibration calls (patch below) and see if that makes a
> difference?

The patch below did not apply to 5.15.74 directly, but I think I was
able to get the corrected patch applied (see below)

That said, I do not have direct access to that hardware, but I created a
build and asked the user test it.

Best regards,
Stefan

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index c32ca691bcc7..964f512603ec 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -196,6 +196,8 @@ static void __dwc3_set_mode(struct work_struct
*work)
otg_set_vbus(dwc->usb2_phy->otg, true);
phy_set_mode(dwc->usb2_generic_phy,
PHY_MODE_USB_HOST);
phy_set_mode(dwc->usb3_generic_phy,
PHY_MODE_USB_HOST);
+ phy_calibrate(dwc->usb2_generic_phy);
+ phy_calibrate(dwc->usb3_generic_phy);
if (dwc->dis_split_quirk) {
reg = dwc3_readl(dwc->regs,
DWC3_GUCTL3);
reg |= DWC3_GUCTL3_SPLITDISABLE;
@@ -1227,6 +1229,8 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
otg_set_vbus(dwc->usb2_phy->otg, true);
phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
+ phy_calibrate(dwc->usb2_generic_phy);
+ phy_calibrate(dwc->usb3_generic_phy);

ret = dwc3_host_init(dwc);
if (ret)


--
Stefan

\
 
 \ /
  Last update: 2022-10-21 00:07    [W:0.090 / U:3.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site