lkml.org 
[lkml]   [2022]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4] pwm: mtk-disp: Fix the parameters calculated by the enabled flag of disp_pwm
Date
From: xinlei lee <xinlei.lee@mediatek.com>

In the original mtk_disp_pwm_get_state() function wrongly uses bit 0 of
CON0 to judge if the PWM is enabled.
However that is indicated by a bit (at a machine dependent position) in
the DISP_PWM_EN register. Fix this accordingly.

Fixes: 3f2b16734914 ("pwm: mtk-disp: Implement atomic API .get_state()")
Signed-off-by: xinlei lee <xinlei.lee@mediatek.com>
---
Rebase on linus/master v6.1-rc1.

change since v3:
1. Remove the empty line between Fixes: and S-o-b.

change since v2:
1. Modify the code for readability.

change since v1:
1. Modify the way to set disp_pwm enbale.
---
---
drivers/pwm/pwm-mtk-disp.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/pwm/pwm-mtk-disp.c b/drivers/pwm/pwm-mtk-disp.c
index c605013e4114..3fbb4bae93a4 100644
--- a/drivers/pwm/pwm-mtk-disp.c
+++ b/drivers/pwm/pwm-mtk-disp.c
@@ -178,7 +178,7 @@ static void mtk_disp_pwm_get_state(struct pwm_chip *chip,
{
struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
u64 rate, period, high_width;
- u32 clk_div, con0, con1;
+ u32 clk_div, pwm_en, con0, con1;
int err;

err = clk_prepare_enable(mdp->clk_main);
@@ -197,7 +197,8 @@ static void mtk_disp_pwm_get_state(struct pwm_chip *chip,
rate = clk_get_rate(mdp->clk_main);
con0 = readl(mdp->base + mdp->data->con0);
con1 = readl(mdp->base + mdp->data->con1);
- state->enabled = !!(con0 & BIT(0));
+ pwm_en = readl(mdp->base + DISP_PWM_EN);
+ state->enabled = !!(pwm_en & mdp->data->enable_mask);
clk_div = FIELD_GET(PWM_CLKDIV_MASK, con0);
period = FIELD_GET(PWM_PERIOD_MASK, con1);
/*
--
2.18.0
\
 
 \ /
  Last update: 2022-10-19 12:06    [W:0.046 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site