lkml.org 
[lkml]   [2022]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] mmc: sdhci-of-arasan: Add support for dynamic configuration
Date
Add dynamic configuration support for Xilinx ZynqMP which takes care of
configuring the SD secure space configuration registers using EEMI APIs,
performing SD reset assert and deassert.
High level sequence:
- Check for the PM dynamic configuration support, if no error proceed with
SD dynamic configurations(next steps) otherwise skip the dynamic
configuration.
- Put the SD Controller in reset.
- Configure SD Fixed configurations.
- Configure the SD Slot Type.
- Configure the BASE_CLOCK.
- Configure the 8-bit support.
- Bring the SD Controller out of reset.
- Wait for 1msec delay.

Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
---
drivers/mmc/host/sdhci-of-arasan.c | 69 ++++++++++++++++++++++++++++++
1 file changed, 69 insertions(+)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 3997cad1f793..f051f3802aff 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -21,6 +21,7 @@
#include <linux/of_device.h>
#include <linux/phy/phy.h>
#include <linux/regmap.h>
+#include <linux/reset.h>
#include <linux/of.h>
#include <linux/firmware/xlnx-zynqmp.h>

@@ -1521,6 +1522,65 @@ static int sdhci_arasan_register_sdclk(struct sdhci_arasan_data *sdhci_arasan,
return 0;
}

+static int sdhci_zynqmp_set_dynamic_config(struct device *dev,
+ struct sdhci_arasan_data *sdhci_arasan)
+{
+ struct sdhci_host *host = sdhci_arasan->host;
+ struct clk_hw *hw = &sdhci_arasan->clk_data.sdcardclk_hw;
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ const char *clk_name = clk_hw_get_name(hw);
+ u32 mhz, node_id = !strcmp(clk_name, "clk_out_sd0") ? NODE_SD_0 : NODE_SD_1;
+ struct reset_control *rstc;
+ int ret;
+
+ /* Obtain SDHC reset control */
+ rstc = devm_reset_control_get_optional_exclusive(dev, NULL);
+ if (IS_ERR(rstc)) {
+ dev_err(dev, "Cannot get SDHC reset.\n");
+ return PTR_ERR(rstc);
+ }
+
+ ret = reset_control_assert(rstc);
+ if (ret)
+ return ret;
+
+ ret = zynqmp_pm_set_sd_config(node_id, SD_CONFIG_FIXED, 0);
+ if (ret)
+ return ret;
+
+ ret = zynqmp_pm_set_sd_config(node_id, SD_CONFIG_EMMC_SEL,
+ !!(host->mmc->caps & MMC_CAP_NONREMOVABLE));
+ if (ret)
+ return ret;
+
+ mhz = DIV_ROUND_CLOSEST_ULL(clk_get_rate(pltfm_host->clk), 1000000);
+ if (mhz > 100 && mhz <= 200)
+ mhz = 200;
+ else if (mhz > 50 && mhz <= 100)
+ mhz = 100;
+ else if (mhz > 25 && mhz <= 50)
+ mhz = 50;
+ else
+ mhz = 25;
+
+ ret = zynqmp_pm_set_sd_config(node_id, SD_CONFIG_BASECLK, mhz);
+ if (ret)
+ return ret;
+
+ ret = zynqmp_pm_set_sd_config(node_id, SD_CONFIG_8BIT,
+ !!(host->mmc->caps & MMC_CAP_8_BIT_DATA));
+ if (ret)
+ return ret;
+
+ ret = reset_control_deassert(rstc);
+ if (ret)
+ return ret;
+
+ usleep_range(1000, 1500);
+
+ return 0;
+}
+
static int sdhci_arasan_add_host(struct sdhci_arasan_data *sdhci_arasan)
{
struct sdhci_host *host = sdhci_arasan->host;
@@ -1685,6 +1745,15 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
goto unreg_clk;
}

+ if (of_device_is_compatible(np, "xlnx,zynqmp-8.9a")) {
+ ret = zynqmp_pm_is_function_supported(PM_IOCTL, IOCTL_SET_SD_CONFIG);
+ if (!ret) {
+ ret = sdhci_zynqmp_set_dynamic_config(dev, sdhci_arasan);
+ if (ret)
+ goto unreg_clk;
+ }
+ }
+
sdhci_arasan->phy = ERR_PTR(-ENODEV);
if (of_device_is_compatible(np, "arasan,sdhci-5.1")) {
sdhci_arasan->phy = devm_phy_get(dev, "phy_arasan");
--
2.17.1
\
 
 \ /
  Last update: 2022-10-19 07:50    [W:0.088 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site