lkml.org 
[lkml]   [2022]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 6.0 436/862] ARM: dts: kirkwood: lsxl: remove first ethernet port
    Date
    From: Michael Walle <michael@walle.cc>

    [ Upstream commit 2d528eda7c96ce5c70f895854ecd5684bd5d80b9 ]

    Both the Linkstation LS-CHLv2 and the LS-XHL have only one ethernet
    port. This has always been wrong, i.e. the board code used to set up
    both ports, but the driver will play nice and return -ENODEV if the
    assiciated PHY is not found. Nevertheless, it is wrong. Remove it.

    Fixes: 876e23333511 ("ARM: kirkwood: add gigabit ethernet and mvmdio device tree nodes")
    Signed-off-by: Michael Walle <michael@walle.cc>
    Reviewed-by: Andrew Lunn <andrew@lunn.ch>
    Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
    Signed-off-by: Sasha Levin <sashal@kernel.org>
    ---
    arch/arm/boot/dts/kirkwood-lsxl.dtsi | 11 -----------
    1 file changed, 11 deletions(-)

    diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
    index 321a40a98ed2..88b70ba1c8fe 100644
    --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi
    +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
    @@ -218,22 +218,11 @@
    &mdio {
    status = "okay";

    - ethphy0: ethernet-phy@0 {
    - reg = <0>;
    - };
    -
    ethphy1: ethernet-phy@8 {
    reg = <8>;
    };
    };

    -&eth0 {
    - status = "okay";
    - ethernet0-port@0 {
    - phy-handle = <&ethphy0>;
    - };
    -};
    -
    &eth1 {
    status = "okay";
    ethernet1-port@0 {
    --
    2.35.1


    \
     
     \ /
      Last update: 2022-10-19 11:12    [W:4.034 / U:0.080 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site