lkml.org 
[lkml]   [2022]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] dt-bindings: rtc: add bindings for max313xx RTCs
Date
Devicetree binding documentation for Analog Devices MAX313XX RTCs

Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
Signed-off-by: Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>
---
.../devicetree/bindings/rtc/adi,max313xx.yaml | 163 ++++++++++++++++++
1 file changed, 163 insertions(+)
create mode 100644 Documentation/devicetree/bindings/rtc/adi,max313xx.yaml

diff --git a/Documentation/devicetree/bindings/rtc/adi,max313xx.yaml b/Documentation/devicetree/bindings/rtc/adi,max313xx.yaml
new file mode 100644
index 000000000..1aa491799
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/adi,max313xx.yaml
@@ -0,0 +1,163 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2022 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/adi,max313xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX313XX series I2C RTC driver
+
+maintainers:
+ - Ibrahim Tilki <Ibrahim.Tilki@analog.com>
+ - Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>
+
+description: Bindings for the Analog Devices MAX313XX series RTCs.
+
+properties:
+ compatible:
+ enum:
+ - adi,max31328
+ - adi,max31329
+ - adi,max31331
+ - adi,max31334
+ - adi,max31341
+ - adi,max31342
+ - adi,max31343
+
+ reg:
+ description: I2C address of the RTC
+ items:
+ - enum: [0x68, 0x69]
+
+ interrupts:
+ minItems: 1
+ maxItems: 2
+
+ interrupt-names:
+ description: |
+ Name of the interrupt pin of the RTC used for IRQ. Not required for
+ RTCs that only have single interrupt pin available. Some of the RTCs
+ share interrupt pins with clock input/output pins.
+ minItems: 1
+ items:
+ - enum: [INTA, INTB]
+ - enum: [INTA, INTB]
+
+ "#clock-cells":
+ description: |
+ RTC can be used as a clock source through its clock output pin when
+ supplied.
+ const: 0
+
+ clocks:
+ description: |
+ RTC uses this clock for clock input when supplied. Clock has to provide
+ one of these four frequencies: 1Hz, 50Hz, 60Hz or 32.768kHz.
+ maxItems: 1
+
+ trickle-diode-disable: true
+
+ trickle-resistor-ohms:
+ description: Enables trickle charger with specified resistor value.
+ enum: [3000, 6000, 11000]
+
+ wakeup-source: true
+
+additionalProperties: false
+
+allOf:
+ - $ref: rtc.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - adi,max31328
+ - adi,max31342
+
+ then:
+ properties:
+ trickle-diode-disable: false
+ trickle-resistor-ohms: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - adi,max31328
+ - adi,max31331
+ - adi,max31334
+ - adi,max31343
+
+ then:
+ properties:
+ clocks: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - adi,max31341
+ - adi,max31342
+
+ then:
+ properties:
+ reg:
+ items:
+ - const: 0x69
+
+ else:
+ properties:
+ reg:
+ items:
+ - const: 0x68
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@68 {
+ reg = <0x68>;
+ compatible = "adi,max31329";
+ clocks = <&clkin>;
+ interrupt-parent = <&gpio>;
+ interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "INTB";
+ };
+ };
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@68 {
+ reg = <0x68>;
+ compatible = "adi,max31331";
+ #clock-cells = <0>;
+ interrupt-parent = <&gpio>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>, <26 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "INTA", "INTB";
+ };
+ };
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@69 {
+ reg = <0x69>;
+ compatible = "adi,max31341";
+ #clock-cells = <0>;
+ clocks = <&clkin>;
+ };
+ };
--
2.25.1
\
 
 \ /
  Last update: 2022-10-19 17:50    [W:2.661 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site