lkml.org 
[lkml]   [2022]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] dt-bindings: PCI: xilinx-nwl: Convert to YAML schemas of Xilinx NWL PCIe Root Port Bridge
Date
Convert to YAML schemas for Xilinx NWL PCIe Root Port Bridge
dt binding.

Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
---
.../bindings/pci/xilinx-nwl-pcie.txt | 73 -----------
.../bindings/pci/xilinx-nwl-pcie.yaml | 122 ++++++++++++++++++
2 files changed, 122 insertions(+), 73 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
create mode 100644 Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.yaml

diff --git a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
deleted file mode 100644
index f56f8c58c5d9..000000000000
--- a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-* Xilinx NWL PCIe Root Port Bridge DT description
-
-Required properties:
-- compatible: Should contain "xlnx,nwl-pcie-2.11"
-- #address-cells: Address representation for root ports, set to <3>
-- #size-cells: Size representation for root ports, set to <2>
-- #interrupt-cells: specifies the number of cells needed to encode an
- interrupt source. The value must be 1.
-- reg: Should contain Bridge, PCIe Controller registers location,
- configuration space, and length
-- reg-names: Must include the following entries:
- "breg": bridge registers
- "pcireg": PCIe controller registers
- "cfg": configuration space region
-- device_type: must be "pci"
-- interrupts: Should contain NWL PCIe interrupt
-- interrupt-names: Must include the following entries:
- "msi1, msi0": interrupt asserted when an MSI is received
- "intx": interrupt asserted when a legacy interrupt is received
- "misc": interrupt asserted when miscellaneous interrupt is received
-- interrupt-map-mask and interrupt-map: standard PCI properties to define the
- mapping of the PCI interface to interrupt numbers.
-- ranges: ranges for the PCI memory regions (I/O space region is not
- supported by hardware)
- Please refer to the standard PCI bus binding document for a more
- detailed explanation
-- msi-controller: indicates that this is MSI controller node
-- msi-parent: MSI parent of the root complex itself
-- legacy-interrupt-controller: Interrupt controller device node for Legacy
- interrupts
- - interrupt-controller: identifies the node as an interrupt controller
- - #interrupt-cells: should be set to 1
- - #address-cells: specifies the number of cells needed to encode an
- address. The value must be 0.
-
-Optional properties:
-- dma-coherent: present if DMA operations are coherent
-- clocks: Input clock specifier. Refer to common clock bindings
-
-Example:
-++++++++
-
-nwl_pcie: pcie@fd0e0000 {
- #address-cells = <3>;
- #size-cells = <2>;
- compatible = "xlnx,nwl-pcie-2.11";
- #interrupt-cells = <1>;
- msi-controller;
- device_type = "pci";
- interrupt-parent = <&gic>;
- interrupts = <0 114 4>, <0 115 4>, <0 116 4>, <0 117 4>, <0 118 4>;
- interrupt-names = "msi0", "msi1", "intx", "dummy", "misc";
- interrupt-map-mask = <0x0 0x0 0x0 0x7>;
- interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
- <0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
- <0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
- <0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
-
- msi-parent = <&nwl_pcie>;
- reg = <0x0 0xfd0e0000 0x0 0x1000>,
- <0x0 0xfd480000 0x0 0x1000>,
- <0x80 0x00000000 0x0 0x1000000>;
- reg-names = "breg", "pcireg", "cfg";
- ranges = <0x02000000 0x00000000 0xe0000000 0x00000000 0xe0000000 0x00000000 0x10000000 /* non-prefetchable memory */
- 0x43000000 0x00000006 0x00000000 0x00000006 0x00000000 0x00000002 0x00000000>;/* prefetchable memory */
-
- pcie_intc: legacy-interrupt-controller {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- };
-
-};
diff --git a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.yaml b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.yaml
new file mode 100644
index 000000000000..97a33e8cc171
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/xilinx-nwl-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx NWL PCIe Root Port Bridge DT description
+
+maintainers:
+ - Thippeswamy Havalige <thippesw@xilinx.com>
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+ compatible:
+ const: xlnx,nwl-pcie-2.11
+
+ reg:
+ items:
+ - description: PCIe bridge registers location.
+ - description: PCIe Controller registers location.
+ - description: PCIe Configuration space region.
+
+ reg-names:
+ items:
+ - const: breg
+ - const: pcireg
+ - const: cfg
+
+ interrupts:
+ items:
+ - description: msi0 interrupt asserted when an MSI is received
+ - description: msi1 interrupt asserted when an MSI is received
+ - description: interrupt asserted when a legacy interrupt is received
+ - description: unused interrupt(dummy)
+ - description: interrupt asserted when miscellaneous interrupt is received
+
+ interrupt-names:
+ minItems: 5
+
+ interrupt-map-mask:
+ items:
+ - const: 0
+ - const: 0
+ - const: 0
+ - const: 7
+
+ "#interrupt-cells":
+ const: 1
+
+ msi-controller:
+ description: Identifies the node as an MSI controller.
+
+ msi-parent:
+ description: MSI controller the device is capable of using.
+
+ interrupt-map:
+ maxItems: 4
+
+ legacy-interrupt-controller:
+ description: Interrupt controller node for handling legacy PCI interrupts.
+ type: object
+ properties:
+ "#address-cells":
+ const: 0
+ "#interrupt-cells":
+ const: 1
+ "interrupt-controller": true
+
+required:
+ - reg
+ - reg-names
+ - interrupts
+ - interrupt-names
+ - "#interrupt-cells"
+ - interrupt-map
+ - msi-controller
+ - msi-parent
+ - interrupt-map-mask
+ - legacy-interrupt-controller
+
+unevaluatedProperties: false
+
+examples:
+ - |
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ nwl_pcie: pcie@fd0e0000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ compatible = "xlnx,nwl-pcie-2.11";
+ #interrupt-cells = <1>;
+ msi-controller;
+ device_type = "pci";
+ interrupt-parent = <&gic>;
+ interrupts = <0 114 4>, <0 115 4>, <0 116 4>, <0 117 4>, <0 118 4>;
+ interrupt-names = "msi0", "msi1", "intx", "dummy", "misc";
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
+ <0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
+ <0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
+ <0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
+
+ msi-parent = <&nwl_pcie>;
+ reg = <0x0 0xfd0e0000 0x0 0x1000>,
+ <0x0 0xfd480000 0x0 0x1000>,
+ <0x80 0x00000000 0x0 0x1000000>;
+ reg-names = "breg", "pcireg", "cfg";
+ ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000
+ 0x43000000 0x00000006 0x0 0x00000006 0x0 0x00000002 0x0>;
+
+ pcie_intc: legacy-interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+
+ };
+ };
--
2.25.1
\
 
 \ /
  Last update: 2022-10-19 16:57    [W:0.327 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site