lkml.org 
[lkml]   [2022]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 6.0 627/862] crypto: ccp - Fail the PSP initialization when writing psp data file failed
    Date
    From: Jacky Li <jackyli@google.com>

    [ Upstream commit efb4b01c1c993d245e6608076684ff2162cf9dc6 ]

    Currently the OS continues the PSP initialization when there is a write
    failure to the init_ex_file. Therefore, the userspace would be told that
    SEV is properly INIT'd even though the psp data file is not updated.
    This is problematic because later when asked for the SEV data, the OS
    won't be able to provide it.

    Fixes: 3d725965f836 ("crypto: ccp - Add SEV_INIT_EX support")
    Reported-by: Peter Gonda <pgonda@google.com>
    Reported-by: kernel test robot <lkp@intel.com>
    Signed-off-by: Jacky Li <jackyli@google.com>
    Acked-by: David Rientjes <rientjes@google.com>
    Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
    Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
    Signed-off-by: Sasha Levin <sashal@kernel.org>
    ---
    drivers/crypto/ccp/sev-dev.c | 26 +++++++++++++++-----------
    1 file changed, 15 insertions(+), 11 deletions(-)

    diff --git a/drivers/crypto/ccp/sev-dev.c b/drivers/crypto/ccp/sev-dev.c
    index 9f588c9728f8..6c49e6d06114 100644
    --- a/drivers/crypto/ccp/sev-dev.c
    +++ b/drivers/crypto/ccp/sev-dev.c
    @@ -231,7 +231,7 @@ static int sev_read_init_ex_file(void)
    return 0;
    }

    -static void sev_write_init_ex_file(void)
    +static int sev_write_init_ex_file(void)
    {
    struct sev_device *sev = psp_master->sev_data;
    struct file *fp;
    @@ -241,14 +241,16 @@ static void sev_write_init_ex_file(void)
    lockdep_assert_held(&sev_cmd_mutex);

    if (!sev_init_ex_buffer)
    - return;
    + return 0;

    fp = open_file_as_root(init_ex_path, O_CREAT | O_WRONLY, 0600);
    if (IS_ERR(fp)) {
    + int ret = PTR_ERR(fp);
    +
    dev_err(sev->dev,
    - "SEV: could not open file for write, error %ld\n",
    - PTR_ERR(fp));
    - return;
    + "SEV: could not open file for write, error %d\n",
    + ret);
    + return ret;
    }

    nwrite = kernel_write(fp, sev_init_ex_buffer, NV_LENGTH, &offset);
    @@ -259,18 +261,20 @@ static void sev_write_init_ex_file(void)
    dev_err(sev->dev,
    "SEV: failed to write %u bytes to non volatile memory area, ret %ld\n",
    NV_LENGTH, nwrite);
    - return;
    + return -EIO;
    }

    dev_dbg(sev->dev, "SEV: write successful to NV file\n");
    +
    + return 0;
    }

    -static void sev_write_init_ex_file_if_required(int cmd_id)
    +static int sev_write_init_ex_file_if_required(int cmd_id)
    {
    lockdep_assert_held(&sev_cmd_mutex);

    if (!sev_init_ex_buffer)
    - return;
    + return 0;

    /*
    * Only a few platform commands modify the SPI/NV area, but none of the
    @@ -285,10 +289,10 @@ static void sev_write_init_ex_file_if_required(int cmd_id)
    case SEV_CMD_PEK_GEN:
    break;
    default:
    - return;
    + return 0;
    }

    - sev_write_init_ex_file();
    + return sev_write_init_ex_file();
    }

    static int __sev_do_cmd_locked(int cmd, void *data, int *psp_ret)
    @@ -361,7 +365,7 @@ static int __sev_do_cmd_locked(int cmd, void *data, int *psp_ret)
    cmd, reg & PSP_CMDRESP_ERR_MASK);
    ret = -EIO;
    } else {
    - sev_write_init_ex_file_if_required(cmd);
    + ret = sev_write_init_ex_file_if_required(cmd);
    }

    print_hex_dump_debug("(out): ", DUMP_PREFIX_OFFSET, 16, 2, data,
    --
    2.35.1


    \
     
     \ /
      Last update: 2022-10-19 16:46    [W:4.178 / U:0.008 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site