lkml.org 
[lkml]   [2022]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [BUG] possible deadlock in __rcu_irq_enter_check_tick
On Tue, Oct 18, 2022 at 03:24:48PM +0100, Mark Rutland wrote:
> On Tue, Oct 11, 2022 at 11:49:11PM -0700, Paul E. McKenney wrote:
> > On Tue, Oct 11, 2022 at 09:18:11PM +0800, Yu Liao wrote:
> > > Hello,
> > >
> > > When I run syzkaller, a deadlock problem occurs. The call stack is as follows:
> > > [ 1088.244366][ C1] ======================================================
> > > [ 1088.244838][ C1] WARNING: possible circular locking dependency detected
> > > [ 1088.245313][ C1] 5.10.0-04424-ga472e3c833d3 #1 Not tainted
> > > [ 1088.245745][ C1] ------------------------------------------------------
> >
> > It is quite possible that an unfortunate set of commits were backported
> > to v5.10. Could you please bisect?
> >
> > > [ 1088.246214][ C1] syz-executor.2/932 is trying to acquire lock:
> > > [ 1088.246628][ C1] ffffa0001440c418 (rcu_node_0){..-.}-{2:2}, at:
> > > __rcu_irq_enter_check_tick+0x128/0x2f4
> > > [ 1088.247330][ C1]
> > > [ 1088.247330][ C1] but task is already holding lock:
> > > [ 1088.247830][ C1] ffff000224d0c298 (&rq->lock){-.-.}-{2:2}, at:
> > > try_to_wake_up+0x6e0/0xd40
> > > [ 1088.248424][ C1]
> > > [ 1088.248424][ C1] which lock already depends on the new lock.
> > > [ 1088.248424][ C1]
> > > [ 1088.249127][ C1]
> > > [ 1088.249127][ C1] the existing dependency chain (in reverse order) is:
> > > [ 1088.249726][ C1]
> > > [ 1088.249726][ C1] -> #1 (&rq->lock){-.-.}-{2:2}:
> > > [ 1088.250239][ C1] validate_chain+0x6dc/0xb0c
> > > [ 1088.250591][ C1] __lock_acquire+0x498/0x940
> > > [ 1088.250942][ C1] lock_acquire+0x228/0x580
> > > [ 1088.251346][ C1] _raw_spin_lock_irqsave+0xc0/0x15c
> > > [ 1088.251758][ C1] resched_cpu+0x5c/0x110
> > > [ 1088.252091][ C1] rcu_implicit_dynticks_qs+0x2b0/0x5d0
> > > [ 1088.252501][ C1] force_qs_rnp+0x244/0x39c
> > > [ 1088.252847][ C1] rcu_gp_fqs_loop+0x2e4/0x440
> > > [ 1088.253219][ C1] rcu_gp_kthread+0x1a4/0x240
> > > [ 1088.253597][ C1] kthread+0x20c/0x260
> > > [ 1088.253963][ C1] ret_from_fork+0x10/0x18
> > > [ 1088.254389][ C1]
> > > [ 1088.254389][ C1] -> #0 (rcu_node_0){..-.}-{2:2}:
> > > [ 1088.255296][ C1] check_prev_add+0xe0/0x105c
> > > [ 1088.256000][ C1] check_prevs_add+0x1c8/0x3d4
> > > [ 1088.256693][ C1] validate_chain+0x6dc/0xb0c
> > > [ 1088.257372][ C1] __lock_acquire+0x498/0x940
> > > [ 1088.257731][ C1] lock_acquire+0x228/0x580
> > > [ 1088.258079][ C1] _raw_spin_lock+0xa0/0x120
> > > [ 1088.258425][ C1] __rcu_irq_enter_check_tick+0x128/0x2f4
> > > [ 1088.258844][ C1] rcu_nmi_enter+0xc4/0xd0
> >
> > This is looking like we took an interrupt while holding an rq lock.
> > Am I reading this correctly? If so, that is bad in and of itself.
>
> In this case it's not an interrupt; per the entry bits below:
>
> > > [ 1088.259183][ C1] arm64_enter_el1_dbg+0xb0/0x160
> > > [ 1088.259623][ C1] el1_dbg+0x28/0x50
> > > [ 1088.260011][ C1] el1_sync_handler+0xf4/0x150
> > > [ 1088.260481][ C1] el1_sync+0x74/0x100
>
> ... this is a synchronous debug exception, which is one of:
>
> * A hardware single-step exception
> * A hardware watchpoint
> * A hardware breakpoint
> * A software breakpoint (i.e. a BRK instruction)
>
> ... and we have to treat those as NMIs.
>
> That could be a kprobe, or a WARN, etc.

Having a go with v6.1-rc1, placing a kprobe on __rcu_irq_enter_check_tick()
causes a recursive exception which triggers the stack overflow detection, so
there are bigger problems here, and we'll need to do some further rework of the
arm64 entry code. FWIW, x86-64 seems fine.

I have a vague recollection that that there was something (some part kprobes,
perhaps) that didn't like being called in NMI context, which is why debug
exceptions aren't accounted as true NMIs (but get most of the same treatment).

I'll have to dig into this a bit more; there are a bunch of subtle interactions
in this area, and I don't want to put a band-aid over this without fully
understanding the implications.

Once we've figured that out for mainline, we can figure out what needs to go to
stable.

Yu, were you particularly interested in tracing __rcu_irq_enter_check_tick(),
or did you stumble upon this by other means?

Thanks,
Mark.

>
> Thanks,
> Mark.
>
> > > [ 1088.260800][ C1] update_irq_load_avg+0x5d8/0xaa0
> > > [ 1088.261194][ C1] update_rq_clock_task+0xb8/0x2d0
> > > [ 1088.261595][ C1] update_rq_clock+0x8c/0x120
> > > [ 1088.261952][ C1] try_to_wake_up+0x70c/0xd40
> > > [ 1088.262305][ C1] wake_up_process+0x1c/0x24
> > > [ 1088.262652][ C1] wakeup_softirqd+0x58/0x64
> > > [ 1088.263000][ C1] __do_softirq+0x6b8/0x95c
> > > [ 1088.263345][ C1] irq_exit+0x27c/0x2d0
> > > [ 1088.263674][ C1] __handle_domain_irq+0x100/0x184
> > > [ 1088.264049][ C1] gic_handle_irq+0xc0/0x760
> > > [ 1088.264394][ C1] el1_irq+0xb8/0x140
> > > [ 1088.264709][ C1] _raw_spin_unlock_irqrestore+0x7c/0x130
> > > [ 1088.265134][ C1] __aarch64_insn_write+0xc4/0x100
> > > [ 1088.265516][ C1] aarch64_insn_patch_text_nosync+0x40/0xa0
> > > [ 1088.265942][ C1] ftrace_make_nop+0x120/0x1a4
> > > [ 1088.266300][ C1] __ftrace_replace_code+0xdc/0x160
> > > [ 1088.266684][ C1] ftrace_replace_code+0x100/0x1a4
> > > [ 1088.267063][ C1] ftrace_modify_all_code+0x1a8/0x260
> > > [ 1088.267456][ C1] arch_ftrace_update_code+0x1c/0x2c
> > > [ 1088.267847][ C1] ftrace_run_update_code+0x38/0xa4
> > > [ 1088.268259][ C1] ftrace_shutdown.part.0+0x2dc/0x550
> > > [ 1088.268682][ C1] unregister_ftrace_function+0x74/0xc0
> > > [ 1088.269117][ C1] perf_ftrace_event_register+0x130/0x1a0
> > > [ 1088.269559][ C1] perf_trace_destroy+0x68/0x9c
> > > [ 1088.269938][ C1] tp_perf_event_destroy+0x1c/0x2c
> > > [ 1088.270340][ C1] _free_event+0x2f4/0x670
> > > [ 1088.270696][ C1] put_event+0x7c/0x90
> > > [ 1088.271031][ C1] perf_event_release_kernel+0x3c0/0x450
> > > [ 1088.271467][ C1] perf_release+0x24/0x34
> > > [ 1088.271824][ C1] __fput+0x1dc/0x500
> > > [ 1088.272155][ C1] ____fput+0x24/0x30
> > > [ 1088.272471][ C1] task_work_run+0xf4/0x1ec
> > > [ 1088.272811][ C1] do_notify_resume+0x378/0x410
> > > [ 1088.273180][ C1] work_pending+0xc/0x198
> > > [ 1088.273504][ C1]
> > > [ 1088.273504][ C1] other info that might help us debug this:
> > > [ 1088.273504][ C1]
> > > [ 1088.274168][ C1] Possible unsafe locking scenario:
> > > [ 1088.274168][ C1]
> > > [ 1088.274658][ C1] CPU0 CPU1
> > > [ 1088.275012][ C1] ---- ----
> > > [ 1088.275367][ C1] lock(&rq->lock);
> > > [ 1088.275646][ C1] lock(rcu_node_0);
> > > [ 1088.276082][ C1] lock(&rq->lock);
> > > [ 1088.276517][ C1] lock(rcu_node_0);
> > > [ 1088.276797][ C1]
> > > [ 1088.276797][ C1] *** DEADLOCK ***
> > > [ 1088.276797][ C1]
> > > [ 1088.277339][ C1] 4 locks held by syz-executor.2/932:
> > > [ 1088.277696][ C1] #0: ffffa000145251e8 (event_mutex){+.+.}-{3:3}, at:
> > > perf_trace_destroy+0x34/0x9c
> > > [ 1088.278345][ C1] #1: ffffa000144fb5a8 (ftrace_lock){+.+.}-{3:3}, at:
> > > unregister_ftrace_function+0x2c/0xc0
> > > [ 1088.279034][ C1] #2: ffff0000c0e0c968 (&p->pi_lock){-.-.}-{2:2}, at:
> > > try_to_wake_up+0xbc/0xd40
> > > [ 1088.279672][ C1] #3: ffff000224d0c298 (&rq->lock){-.-.}-{2:2}, at:
> > > try_to_wake_up+0x6e0/0xd40
> > > [ 1088.280300][ C1]
> > > [ 1088.280300][ C1] stack backtrace:
> > > [ 1088.280706][ C1] CPU: 1 PID: 932 Comm: syz-executor.2 Not tainted
> > > 5.10.0-04424-ga472e3c833d3 #1
> > > [ 1088.281315][ C1] Hardware name: linux,dummy-virt (DT)
> > > [ 1088.281679][ C1] Call trace:
> > > [ 1088.281910][ C1] dump_backtrace+0x0/0x41c
> > > [ 1088.282218][ C1] show_stack+0x30/0x40
> > > [ 1088.282505][ C1] dump_stack+0x1fc/0x2c0
> > > [ 1088.282807][ C1] print_circular_bug+0x1ec/0x284
> > > [ 1088.283149][ C1] check_noncircular+0x1cc/0x1ec
> > > [ 1088.283486][ C1] check_prev_add+0xe0/0x105c
> > > [ 1088.283804][ C1] check_prevs_add+0x1c8/0x3d4
> > > [ 1088.284126][ C1] validate_chain+0x6dc/0xb0c
> > > [ 1088.284442][ C1] __lock_acquire+0x498/0x940
> > > [ 1088.284764][ C1] lock_acquire+0x228/0x580
> > > [ 1088.285072][ C1] _raw_spin_lock+0xa0/0x120
> > > [ 1088.285392][ C1] __rcu_irq_enter_check_tick+0x128/0x2f4
> > > [ 1088.285779][ C1] rcu_nmi_enter+0xc4/0xd0
> > > [ 1088.286082][ C1] arm64_enter_el1_dbg+0xb0/0x160
> > > [ 1088.286420][ C1] el1_dbg+0x28/0x50
> > > [ 1088.286689][ C1] el1_sync_handler+0xf4/0x150
> > > [ 1088.287010][ C1] el1_sync+0x74/0x100
> > > [ 1088.287295][ C1] update_irq_load_avg+0x5d8/0xaa0
> > > [ 1088.287640][ C1] update_rq_clock_task+0xb8/0x2d0
> > > [ 1088.287988][ C1] update_rq_clock+0x8c/0x120
> > > [ 1088.288309][ C1] try_to_wake_up+0x70c/0xd40
> > > [ 1088.288629][ C1] wake_up_process+0x1c/0x24
> > > [ 1088.288945][ C1] wakeup_softirqd+0x58/0x64
> > > [ 1088.289271][ C1] __do_softirq+0x6b8/0x95c
> > > [ 1088.289580][ C1] irq_exit+0x27c/0x2d0
> > > [ 1088.289868][ C1] __handle_domain_irq+0x100/0x184
> > > [ 1088.290211][ C1] gic_handle_irq+0xc0/0x760
> > > [ 1088.290522][ C1] el1_irq+0xb8/0x140
> > > [ 1088.290801][ C1] _raw_spin_unlock_irqrestore+0x7c/0x130
> > > [ 1088.291188][ C1] __aarch64_insn_write+0xc4/0x100
> > > [ 1088.291533][ C1] aarch64_insn_patch_text_nosync+0x40/0xa0
> > > [ 1088.291928][ C1] ftrace_make_nop+0x120/0x1a4
> > > [ 1088.292256][ C1] __ftrace_replace_code+0xdc/0x160
> > > [ 1088.292613][ C1] ftrace_replace_code+0x100/0x1a4
> > > [ 1088.292963][ C1] ftrace_modify_all_code+0x1a8/0x260
> > > [ 1088.293335][ C1] arch_ftrace_update_code+0x1c/0x2c
> > > [ 1088.293694][ C1] ftrace_run_update_code+0x38/0xa4
> > > [ 1088.294048][ C1] ftrace_shutdown.part.0+0x2dc/0x550
> > > [ 1088.294415][ C1] unregister_ftrace_function+0x74/0xc0
> > > [ 1088.294787][ C1] perf_ftrace_event_register+0x130/0x1a0
> > > [ 1088.295172][ C1] perf_trace_destroy+0x68/0x9c
> > > [ 1088.295500][ C1] tp_perf_event_destroy+0x1c/0x2c
> > > [ 1088.295850][ C1] _free_event+0x2f4/0x670
> > > [ 1088.296154][ C1] put_event+0x7c/0x90
> > > [ 1088.296439][ C1] perf_event_release_kernel+0x3c0/0x450
> > > [ 1088.296820][ C1] perf_release+0x24/0x34
> > > [ 1088.297125][ C1] __fput+0x1dc/0x500
> > > [ 1088.297404][ C1] ____fput+0x24/0x30
> > > [ 1088.297682][ C1] task_work_run+0xf4/0x1ec
> > > [ 1088.297989][ C1] do_notify_resume+0x378/0x410
> > > [ 1088.298316][ C1] work_pending+0xc/0x198
> > >
> > > I checked the code. The following scenarios may cause deadlock.
> > >
> > > static void ttwu_queue(struct task_struct *p, int cpu, int wake_flags)
> > > {
> > > struct rq *rq = cpu_rq(cpu);
> > > struct rq_flags rf;
> > >
> > > if (ttwu_queue_wakelist(p, cpu, wake_flags))
> > > return;
> > >
> > > rq_lock(rq, &rf);
> > > update_rq_clock(rq);
> > > ===> el1_dbg
> > > ->rcu_nmi_enter
> > > ->__rcu_irq_enter_check_tick
> > > ->raw_spin_lock_rcu_node(rdp->mynode);
> > > ttwu_do_activate(rq, p, wake_flags, &rf);
> > > rq_unlock(rq, &rf);
> > > }
> > >
> > > static void rcu_gp_fqs(bool first_time)
> > > {
> > > struct rcu_node *rnp = rcu_get_root();
> > >
> > > WRITE_ONCE(rcu_state.gp_activity, jiffies);
> > > WRITE_ONCE(rcu_state.n_force_qs, rcu_state.n_force_qs + 1);
> > > if (first_time) {
> > > /* Collect dyntick-idle snapshots. */
> > > force_qs_rnp(dyntick_save_progress_counter);
> > > } else {
> > > /* Handle dyntick-idle and offline CPUs. */
> > > force_qs_rnp(rcu_implicit_dynticks_qs);
> > > ===>raw_spin_lock_irqsave_rcu_node(rnp, flags);
> > > ===>rcu_implicit_dynticks_qs
> > > ->resched_cpu
> > > ->raw_spin_lock_irqsave(&rq->lock, flags);
> > > }
> > > /* Clear flag to prevent immediate re-entry. */
> > > if (READ_ONCE(rcu_state.gp_flags) & RCU_GP_FLAG_FQS) {
> > > raw_spin_lock_irq_rcu_node(rnp);
> > > WRITE_ONCE(rcu_state.gp_flags,
> > > READ_ONCE(rcu_state.gp_flags) & ~RCU_GP_FLAG_FQS);
> > > raw_spin_unlock_irq_rcu_node(rnp);
> > > }
> > > }
> > >

\
 
 \ /
  Last update: 2022-10-19 16:32    [W:0.195 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site