Messages in this thread Patch in this message | | | From | Amjad Ouled-Ameur <> | Date | Wed, 19 Oct 2022 16:01:03 +0200 | Subject | [PATCH v3 1/2] spi: dt-bindings: amlogic, meson-gx-spicc: Add pinctrl names for SPI signal states |
| |
SPI pins of the SPICC Controller in Meson-GX needs to be controlled by pin biais when idle. Therefore define three pinctrl names: - default: SPI pins are controlled by spi function. - idle-high: SCLK pin is pulled-up, but MOSI/MISO are still controlled by spi function. - idle-low: SCLK pin is pulled-down, but MOSI/MISO are still controlled by spi function.
Reported-by: Da Xue <da@libre.computer> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com> --- .../bindings/spi/amlogic,meson-gx-spicc.yaml | 67 ++++++++++++++-------- 1 file changed, 42 insertions(+), 25 deletions(-)
diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml index 0c10f7678178..3e47fe7760a8 100644 --- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml +++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml @@ -43,31 +43,48 @@ properties: minItems: 1 maxItems: 2 -if: - properties: - compatible: - contains: - enum: - - amlogic,meson-g12a-spicc - -then: - properties: - clocks: - minItems: 2 - - clock-names: - items: - - const: core - - const: pclk - -else: - properties: - clocks: - maxItems: 1 - - clock-names: - items: - - const: core +allOf: + - if: + properties: + compatible: + contains: + enum: + - amlogic,meson-g12a-spicc + + then: + properties: + clocks: + minItems: 2 + + clock-names: + items: + - const: core + - const: pclk + + else: + properties: + clocks: + maxItems: 1 + + clock-names: + items: + - const: core + + - if: + properties: + compatible: + contains: + enum: + - amlogic,meson-gx-spicc + + then: + properties: + pinctrl-names: + minItems: 1 + items: + - const: default + - const: idle-high + - const: idle-low required: - compatible -- b4 0.10.1
| |