lkml.org 
[lkml]   [2022]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: dts: lan966x: Enable sgpio on pcb8291
Date
Enable sgpio node on pcb8291 as this is needed to be able to control
the LEDs on this board. Otherwise the LEDs support on the board will
not be available.
On the other board pcb8309 the sgpio is already enabled because it
needed to access the SFP ports.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
---
arch/arm/boot/dts/lan966x-pcb8291.dts | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/lan966x-pcb8291.dts b/arch/arm/boot/dts/lan966x-pcb8291.dts
index f4f054cdf2a87..3a3d76af86122 100644
--- a/arch/arm/boot/dts/lan966x-pcb8291.dts
+++ b/arch/arm/boot/dts/lan966x-pcb8291.dts
@@ -69,6 +69,12 @@ can0_b_pins: can0-b-pins {
pins = "GPIO_35", "GPIO_36";
function = "can0_b";
};
+
+ sgpio_a_pins: sgpio-a-pins {
+ /* SCK, D0, D1, LD */
+ pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35";
+ function = "sgpio_a";
+ };
};

&can0 {
@@ -118,6 +124,20 @@ &serdes {
status = "okay";
};

+&sgpio {
+ pinctrl-0 = <&sgpio_a_pins>;
+ pinctrl-names = "default";
+ microchip,sgpio-port-ranges = <0 3>, <8 11>;
+ status = "okay";
+
+ gpio@0 {
+ ngpios = <64>;
+ };
+ gpio@1 {
+ ngpios = <64>;
+ };
+};
+
&switch {
status = "okay";
};
--
2.38.0
\
 
 \ /
  Last update: 2022-10-19 09:48    [W:0.061 / U:0.896 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site