lkml.org 
[lkml]   [2022]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v5 2/2] edac: zynqmp_ocm: Add EDAC support for ZynqMP OCM
Date
Hi Boris,

> -----Original Message-----
> From: Borislav Petkov <bp@alien8.de>
> Sent: Thursday, September 29, 2022 9:26 PM
> To: Potthuri, Sai Krishna <sai.krishna.potthuri@amd.com>
> Cc: Rob Herring <robh+dt@kernel.org>; Krzysztof Kozlowski
> <krzysztof.kozlowski+dt@linaro.org>; Michal Simek
> <michal.simek@xilinx.com>; Mauro Carvalho Chehab
> <mchehab@kernel.org>; Tony Luck <tony.luck@intel.com>; James Morse
> <james.morse@arm.com>; Robert Richter <rric@kernel.org>;
> devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-
> kernel@vger.kernel.org; linux-edac@vger.kernel.org;
> saikrishna12468@gmail.com; git (AMD-Xilinx) <git@amd.com>; Datta,
> Shubhrajyoti <shubhrajyoti.datta@amd.com>
> Subject: Re: [PATCH v5 2/2] edac: zynqmp_ocm: Add EDAC support for
> ZynqMP OCM
>
> On Fri, Sep 09, 2022 at 11:35:48AM +0530, Sai Krishna Potthuri wrote:
> > Subject: Re: [PATCH v5 2/2] edac: zynqmp_ocm: Add EDAC support for
> ZynqMP OCM
>
> "EDAC/zynqmp: Add ..."
Will fix in next version.
>
> > Add EDAC support for Xilinx ZynqMP OCM Controller, this driver
> > reports CE and UE errors based on the interrupts,
>
> Based on the interrupts? Do you mean, it raises an interrupt in order to
> report errors vs polling?
Once CE/UE error occur, controller raises an interrupt.
>
> > and also creates ue/ce
>
> s/ue/UE/g
> s/ce/CE/g
Will fix in next version.
>
> > sysfs entries for error injection.
>
> All the injection logic needs to be behind CONFIG_EDAC_DEBUG. You don't
> want to have injection functionality present in production.
Sure, will fix in next version.
>
> > Co-developed-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
> > Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
> > Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
> > Reported-by: kernel test robot <lkp@intel.com>
> > ---
> > MAINTAINERS | 7 +
> > drivers/edac/Kconfig | 9 +
> > drivers/edac/Makefile | 1 +
> > drivers/edac/zynqmp_ocm_edac.c | 622
> +++++++++++++++++++++++++++++++++
> > 4 files changed, 639 insertions(+)
> > create mode 100644 drivers/edac/zynqmp_ocm_edac.c
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index edc96cdb85e8..7a40caf536c2 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -21692,6 +21692,13 @@ F:
> Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-
> dpdma.yaml
> > F: drivers/dma/xilinx/xilinx_dpdma.c
> > F: include/dt-bindings/dma/xlnx-zynqmp-dpdma.h
> >
> > +XILINX ZYNQMP OCM EDAC DRIVER
> > +M: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
> > +M: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
> > +S: Maintained
> > +F: Documentation/devicetree/bindings/memory-
> controllers/xlnx,zynqmp-ocmc-1.0.yaml
> > +F: drivers/edac/zynqmp_ocm_edac.c
> > +
> > XILINX ZYNQMP PSGTR PHY DRIVER
> > M: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
> > M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
> > index 58ab63642e72..bc30b7d02062 100644
> > --- a/drivers/edac/Kconfig
> > +++ b/drivers/edac/Kconfig
> > @@ -539,4 +539,13 @@ config EDAC_DMC520
> > Support for error detection and correction on the
> > SoCs with ARM DMC-520 DRAM controller.
> >
> > +config EDAC_ZYNQMP_OCM
> > + tristate "Xilinx ZynqMP OCM Controller"
> > + depends on ARCH_ZYNQMP || COMPILE_TEST
> > + help
> > + This driver is targeted for Xilinx ZynqMP OCM (On Chip Memory)
> > + controller to support for error detection and correction.
> > + This driver can also be built as a module. If so, the module
> > + will be called zynqmp_ocm_edac.
> > +
> > endif # EDAC
> > diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
> > index 2d1641a27a28..634c1cec1588 100644
> > --- a/drivers/edac/Makefile
> > +++ b/drivers/edac/Makefile
> > @@ -84,3 +84,4 @@ obj-$(CONFIG_EDAC_QCOM) +=
> qcom_edac.o
> > obj-$(CONFIG_EDAC_ASPEED) += aspeed_edac.o
> > obj-$(CONFIG_EDAC_BLUEFIELD) += bluefield_edac.o
> > obj-$(CONFIG_EDAC_DMC520) += dmc520_edac.o
> > +obj-$(CONFIG_EDAC_ZYNQMP_OCM) +=
> zynqmp_ocm_edac.o
> > diff --git a/drivers/edac/zynqmp_ocm_edac.c
> b/drivers/edac/zynqmp_ocm_edac.c
> > new file mode 100644
> > index 000000000000..a8da94f3e067
> > --- /dev/null
> > +++ b/drivers/edac/zynqmp_ocm_edac.c
> > @@ -0,0 +1,622 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Xilinx ZynqMP OCM ECC Driver
> > + *
> > + * Copyright (C) 2022 Advanced Micro Devices, Inc.
> > + */
> > +
> > +#include <linux/edac.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_platform.h>
> > +#include <linux/platform_device.h>
> > +
> > +#include "edac_module.h"
> > +
> > +#define ZYNQMP_OCM_EDAC_MSG_SIZE 256
> > +
> > +#define ZYNQMP_OCM_EDAC_STRING "zynqmp_ocm"
> > +
> > +/* Controller registers */
> > +#define CTRL_OFST 0x0
> > +#define OCM_ISR_OFST 0x04
> > +#define OCM_IMR_OFST 0x08
> > +#define OCM_IEN_OFST 0x0C
> > +#define OCM_IDS_OFST 0x10
> > +
> > +/* ECC control register */
> > +#define ECC_CTRL_OFST 0x14
> > +
> > +/* Correctable error info registers */
> > +#define CE_FFA_OFST 0x1C
> > +#define CE_FFD0_OFST 0x20
> > +#define CE_FFD1_OFST 0x24
> > +#define CE_FFD2_OFST 0x28
> > +#define CE_FFD3_OFST 0x2C
> > +#define CE_FFE_OFST 0x30
> > +
> > +/* Uncorrectable error info registers */
> > +#define UE_FFA_OFST 0x34
> > +#define UE_FFD0_OFST 0x38
> > +#define UE_FFD1_OFST 0x3C
> > +#define UE_FFD2_OFST 0x40
> > +#define UE_FFD3_OFST 0x44
> > +#define UE_FFE_OFST 0x48
> > +
> > +/* ECC control register bit field definitions */
> > +#define ECC_CTRL_CLR_CE_ERR 0x40
> > +#define ECC_CTRL_CLR_UE_ERR 0x80
> > +
> > +/* Fault injection data and count registers */
> > +#define OCM_FID0_OFST 0x4C
> > +#define OCM_FID1_OFST 0x50
> > +#define OCM_FID2_OFST 0x54
> > +#define OCM_FID3_OFST 0x58
> > +#define OCM_FIC_OFST 0x74
> > +
> > +#define UE_MAX_BITPOS_LOWER 31
> > +#define UE_MIN_BITPOS_UPPER 32
> > +#define UE_MAX_BITPOS_UPPER 63
> > +
> > +/* Interrupt masks */
> > +#define OCM_CEINTR_MASK BIT(6)
> > +#define OCM_UEINTR_MASK BIT(7)
> > +#define OCM_ECC_ENABLE_MASK BIT(0)
> > +#define OCM_CEUE_MASK GENMASK(7, 6)
> > +
> > +#define OCM_FICOUNT_MASK GENMASK(23, 0)
> > +#define OCM_BASEVAL 0xFFFC0000
> > +#define EDAC_DEVICE "ZynqMP-OCM"
>
> Align those vertically properly.
Will fix in next version.
>
> > +
> > +/**
> > + * struct ecc_error_info - ECC error log information
> > + * @addr: Fault generated at this address
> > + * @data0: Generated fault data
> > + * @data1: Generated fault data
>
> What's the difference?
Upper and Lower 32-bit, i will update the doc to reflect the same.
>
> > + */
> > +struct ecc_error_info {
> > + u32 addr;
> > + u32 data0;
> > + u32 data1;
> > +};
> > +
> > +/**
> > + * struct zynqmp_ocm_ecc_status - ECC status information to report
> > + * @ce_cnt: Correctable error count
> > + * @ue_cnt: Uncorrectable error count
> > + * @ceinfo: Correctable error log information
> > + * @ueinfo: Uncorrectable error log information
> > + */
> > +struct zynqmp_ocm_ecc_status {
> > + u32 ce_cnt;
> > + u32 ue_cnt;
> > + struct ecc_error_info ceinfo;
> > + struct ecc_error_info ueinfo;
> > +};
> > +
> > +/**
> > + * struct zynqmp_ocm_edac_priv - DDR memory controller private
> instance data
> > + * @baseaddr: Base address of the DDR controller
> > + * @message: Buffer for framing the event specific info
> > + * @stat: ECC status information
> > + * @p_data: Pointer to platform data
> > + * @ce_cnt: Correctable Error count
> > + * @ue_cnt: Uncorrectable Error count
> > + * @ce_bitpos: Bit position for Correctable Error
> > + * @ue_bitpos0: First bit position for Uncorrectable Error
> > + * @ue_bitpos1: Second bit position for Uncorrectable Error
> > + */
> > +struct zynqmp_ocm_edac_priv {
>
> Why do those structs have a "zynqmp_ocm_" prefix if they're going to be
> used only in this driver?
>
> > + void __iomem *baseaddr;
> > + char message[ZYNQMP_OCM_EDAC_MSG_SIZE];
> > + struct zynqmp_ocm_ecc_status stat;
> > + const struct zynqmp_ocm_platform_data *p_data;
> > + u32 ce_cnt;
> > + u32 ue_cnt;
> > + u8 ce_bitpos;
> > + u8 ue_bitpos0;
> > + u8 ue_bitpos1;
> > +};
> > +
> > +/**
> > + * zynqmp_ocm_edac_geterror_info - Get the current ecc error info
>
> s/ecc/ECC/g
>
> > + * @base: Pointer to the base address of the ddr memory controller
>
> s/ddr/DDR/g
Will fix in next version.
>
> > + * @p: Pointer to the ocm ecc status structure
> > + * @mask: Status register mask value
> > + *
> > + * Determines there is any ecc error or not
> > + *
> > + */
> > +static void zynqmp_ocm_edac_geterror_info(void __iomem *base,
> > + struct zynqmp_ocm_ecc_status *p,
> int mask)
>
> Drop the "zynqmp_ocm_edac_" prefix from all static functions. That's
> just useless naming. And it is a lot more readable this way:
Sure, Will fix in next version.
>
> static void get_error_info(void __iomem *base, struct ecc_status *p, int
> mask)
> {
> ...
>
> nice and simple.
>
> > +{
> > + if (mask & OCM_CEINTR_MASK) {
> > + p->ce_cnt++;
> > + p->ceinfo.data0 = readl(base + CE_FFD0_OFST);
> > + p->ceinfo.data1 = readl(base + CE_FFD1_OFST);
> > + p->ceinfo.addr = (OCM_BASEVAL | readl(base +
> CE_FFA_OFST));
> > + writel(ECC_CTRL_CLR_CE_ERR, base + OCM_ISR_OFST);
> > + } else if (mask & OCM_UEINTR_MASK) {
> > + p->ue_cnt++;
> > + p->ueinfo.data0 = readl(base + UE_FFD0_OFST);
> > + p->ueinfo.data1 = readl(base + UE_FFD1_OFST);
> > + p->ueinfo.addr = (OCM_BASEVAL | readl(base +
> UE_FFA_OFST));
> > + writel(ECC_CTRL_CLR_UE_ERR, base + OCM_ISR_OFST);
> > + }
>
> else {
> WARN_ON_ONCE(...);
> }
>
> or does the hardware always give a correct mask?
Ok, i will drop this else block.
>
> :)
>
> > +}
> > +
> > +/**
> > + * zynqmp_ocm_edac_handle_error - Handle controller error types CE
> and UE
> > + * @dci: Pointer to the edac device controller instance
> > + * @p: Pointer to the ocm ecc status structure
> > + *
> > + * Handles the controller ECC correctable and uncorrectable error.
> > + */
> > +static void zynqmp_ocm_edac_handle_error(struct edac_device_ctl_info
> *dci,
> > + struct zynqmp_ocm_ecc_status *p)
> > +{
> > + struct zynqmp_ocm_edac_priv *priv = dci->pvt_info;
> > + struct ecc_error_info *pinf;
> > +
> > + if (p->ce_cnt) {
> > + pinf = &p->ceinfo;
> > + snprintf(priv->message, ZYNQMP_OCM_EDAC_MSG_SIZE,
> > + "\nOCM ECC error type :%s\n"
> > + "Addr: [0x%X]\nFault Data[31:0]: [0x%X]\n"
> > + "Fault Data[63:32]: [0x%X]",
>
> Do not break the strings in lines for easier grepping. IOW:
>
> "OCM ECC error type :%s Addr: [0x%X] Fault
> Data[31:0]: [0x%X] Fault Data[63:32]: [0x%X]\n"
>
> And you can do:
>
> "... Fault Data[0x%08x%08x]\n",
> pinf->data1, pinf->data0);
>
> and dump the whole 64-bit value.
Sure, Will fix in next version.
>
> > + "CE", pinf->addr, pinf->data0, pinf->data1);
> > + edac_device_handle_ce(dci, 0, 0, priv->message);
> > + }
> > +
> > + if (p->ue_cnt) {
> > + pinf = &p->ueinfo;
> > + snprintf(priv->message, ZYNQMP_OCM_EDAC_MSG_SIZE,
> > + "\nOCM ECC error type :%s\n"
> > + "Addr: [0x%X]\nFault Data[31:0]: [0x%X]\n"
> > + "Fault Data[63:32]: [0x%X]",
> > + "UE", pinf->addr, pinf->data0, pinf->data1);
>
> Ditto.
>
> > + edac_device_handle_ue(dci, 0, 0, priv->message);
> > + }
> > +
> > + memset(p, 0, sizeof(*p));
> > +}
> > +
> > +/**
> > + * zynqmp_ocm_edac_intr_handler - isr routine
>
> s/isr/ISR/
>
> > + * @irq: irq number
> > + * @dev_id: device id pointer
> > + *
> > + * This is the ISR routine called by edac core interrupt thread.
>
> This is simply not true.
>
> Also,
>
> s/edac/EDAC/g
>
> You get the idea - all acronyms in all-caps.
Yes, will fix in next version.
>
> > + * Used to check and post ECC errors.
> > + *
> > + * Return: IRQ_NONE, if interrupt not set or IRQ_HANDLED otherwise
> > + */
> > +static irqreturn_t zynqmp_ocm_edac_intr_handler(int irq, void *dev_id)
> > +{
> > + struct edac_device_ctl_info *dci = dev_id;
> > + struct zynqmp_ocm_edac_priv *priv = dci->pvt_info;
> > + int regval;
> > +
> > + regval = readl(priv->baseaddr + OCM_ISR_OFST);
> > + if (!(regval & OCM_CEUE_MASK))
> > + return IRQ_NONE;
> > +
> > + zynqmp_ocm_edac_geterror_info(priv->baseaddr,
> > + &priv->stat, regval);
>
> No need to break that line.
Ok, will fix it.
>
> > +
> > + priv->ce_cnt += priv->stat.ce_cnt;
> > + priv->ue_cnt += priv->stat.ue_cnt;
> > + zynqmp_ocm_edac_handle_error(dci, &priv->stat);
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +/**
> > + * zynqmp_ocm_edac_get_eccstate - Return the controller ecc status
> > + * @base: Pointer to the ddr memory controller base address
> > + *
> > + * Get the ECC enable/disable status for the controller
> > + *
> > + * Return: ecc status 0/1.
> > + */
> > +static bool zynqmp_ocm_edac_get_eccstate(void __iomem *base)
> > +{
> > + return readl(base + ECC_CTRL_OFST) & OCM_ECC_ENABLE_MASK;
> > +}
>
> As already mentioned
>
> #ifdef CONFIG_EDAC_DEBUG
Yes, I will do that.
>
> ...
>
> > +
> > +/**
> > + * zynqmp_ocm_edac_inject_fault_count_show - Shows fault injection
> count
> > + * @dci: Pointer to the edac device struct
> > + * @data: Pointer to user data
> > + *
> > + * Shows the fault injection count, once the counter reaches
> > + * zero, it injects errors
> > + * Return: Number of bytes copied on success else error code.
> > + */
> > +static ssize_t zynqmp_ocm_edac_inject_fault_count_show(struct
> edac_device_ctl_info *dci,
> > + char *data)
> > +{
> > + struct zynqmp_ocm_edac_priv *priv = dci->pvt_info;
> > +
> > + return sprintf(data, "FIC: 0x%x\n",
>
> "FIC"?
>
> Maybe make it human readable:
>
> "Fault injection count: "
Ok.
>
> > + readl(priv->baseaddr + OCM_FIC_OFST));
> > +}
> > +
> > +/**
> > + * zynqmp_ocm_edac_inject_fault_count_store - write fi count
> > + * @dci: Pointer to the edac device struct
> > + * @data: Pointer to user data
> > + * @count: read the size bytes from buffer
> > + *
> > + * Update the fault injection count register, once the counter reaches
> > + * zero, it injects errors
>
> How does the counter reach zero?
>
> I guess I'm unclear on how this is supposed to be used: you write some
> fault injection count value and what happens then?
This counter must be programmed by the user to tell when to inject the error.
It's an internal counter and count down on every clock cycle. Once counter
reach to zero, it injects single/multiple error.
In case if the user doesn’t want to add any delay, this counter must be
programmed with zero.
>
> > + * Return: Number of bytes copied on success else error code.
> > + */
> > +static ssize_t zynqmp_ocm_edac_inject_fault_count_store(struct
> edac_device_ctl_info *dci,
> > + const char *data,
> size_t count)
> > +{
> > + struct zynqmp_ocm_edac_priv *priv = dci->pvt_info;
> > + u32 ficount;
> > +
> > + if (!data)
> > + return -EFAULT;
> > +
> > + if (kstrtouint(data, 0, &ficount))
> > + return -EINVAL;
> > +
> > + ficount &= OCM_FICOUNT_MASK;
>
> Perhaps issue a printk to say that the user value is truncated if the &
> is not 0.
Ok, will add a printk here if user value is truncated.
>
> > + writel(ficount, priv->baseaddr + OCM_FIC_OFST);
> > +
> > + return count;
> > +}
> > +
> > +/**
> > + * zynqmp_ocm_edac_inject_cebitpos_show - Shows CE bit position
> > + * @dci: Pointer to the edac device struct
> > + * @data: Pointer to user data
> > + *
> > + * Shows the Correctable error bit position,
> > + * Return: Number of bytes copied on success else error code.
> > + */
> > +static ssize_t zynqmp_ocm_edac_inject_cebitpos_show(struct
> edac_device_ctl_info
> > + *dci, char *data)
>
> Align arguments on the opening brace.
Ok.
>
> > +{
> > + struct zynqmp_ocm_edac_priv *priv = dci->pvt_info;
> > +
> > + if (priv->ce_bitpos <= UE_MAX_BITPOS_LOWER)
> > + return sprintf(data, "Fault Injection Data Reg: [0x%x]\n",
>
> So this is not really intuitive: how does "Fault Injection Data Reg"
> mean the CE bit position?
This register stores the bit position.
I will update the print statement here to avoid confusion to the user.
>
> > + ((readl(priv->baseaddr + OCM_FID0_OFST))));
> > +
> > + return sprintf(data, "Fault Injection Data Reg: [0x%x]\n",
> > + ((readl(priv->baseaddr + OCM_FID1_OFST))));
>
> What's in FID1 then?
We have set of registers to store the bit positions for complete data.
FID0 contains [31:0]
FID1 contains [63:32]
>
> > +}
> > +
> > +/**
> > + * zynqmp_ocm_edac_inject_cebitpos_store - Set CE bit position
> > + * @dci: Pointer to the edac device struct
> > + * @data: Pointer to user data
> > + * @count: read the size bytes from buffer
> > + *
> > + * Set any one bit to inject CE error
> > + * Return: Number of bytes copied on success else error code.
> > + */
> > +static ssize_t zynqmp_ocm_edac_inject_cebitpos_store(struct
> edac_device_ctl_info *dci,
> > + const char *data, size_t
> count)
> > +{
> > + struct zynqmp_ocm_edac_priv *priv = dci->pvt_info;
> > +
> > + if (!data)
> > + return -EFAULT;
> > +
> > + if (kstrtou8(data, 0, &priv->ce_bitpos))
> > + return -EINVAL;
> > +
> > + if (priv->ce_bitpos <= UE_MAX_BITPOS_LOWER) {
> > + writel(1 << priv->ce_bitpos, priv->baseaddr +
> OCM_FID0_OFST);
>
> BIT(priv->ce_bitpos)
>
> and so on.
Sure, will update.
>
> > + writel(0, priv->baseaddr + OCM_FID1_OFST);
> > + } else if (priv->ce_bitpos <= UE_MAX_BITPOS_UPPER) {
> > + writel(1 << (priv->ce_bitpos - UE_MIN_BITPOS_UPPER),
> > + priv->baseaddr + OCM_FID1_OFST);
> > + writel(0, priv->baseaddr + OCM_FID0_OFST);
> > + } else {
> > + edac_printk(KERN_ERR, EDAC_DEVICE,
> > + "Bit number > 64 is not valid\n");
>
> >=
>
> and you can do that checking above, after the kstrtou8() where you don't
> return count but an error code.
Ok, will update.
>
> > + }
> > +
> > + return count;
> > +}
> > +
> > +/**
> > + * zynqmp_ocm_edac_inject_uebitpos0_show - Shows UE bit postion0
> > + * @dci: Pointer to the edac device struct
> > + * @data: Pointer to user data
> > + *
> > + * Shows the one of bit position for UE error
> > + * Return: Number of bytes copied on success else error code.
> > + */
> > +static ssize_t zynqmp_ocm_edac_inject_uebitpos0_show(struct
> edac_device_ctl_info *dci,
> > + char *data)
> > +{
> > + struct zynqmp_ocm_edac_priv *priv = dci->pvt_info;
> > +
> > + if (priv->ue_bitpos0 <= UE_MAX_BITPOS_LOWER)
> > + return sprintf(data, "Fault Injection Data Reg: [0x%x]\n",
> > + ((readl(priv->baseaddr + OCM_FID0_OFST))));
> > +
> > + return sprintf(data, "Fault Injection Data Reg: [0x%x]\n",
> > + ((readl(priv->baseaddr + OCM_FID1_OFST))));
> > +}
> > +
> > +/**
> > + * zynqmp_ocm_edac_inject_uebitpos0_store - set UE bit position0
> > + * @dci: Pointer to the edac device struct
> > + * @data: Pointer to user data
> > + * @count: read the size bytes from buffer
> > + *
> > + * Set the first bit position for UE Error generation,we need to configure
> > + * any two bit positions to inject UE Error
> > + * Return: Number of bytes copied on success else error code.
> > + */
> > +static ssize_t zynqmp_ocm_edac_inject_uebitpos0_store(struct
> edac_device_ctl_info *dci,
> > + const char *data, size_t
> count)
> > +{
> > + struct zynqmp_ocm_edac_priv *priv = dci->pvt_info;
> > +
> > + if (!data)
> > + return -EFAULT;
> > +
> > + if (kstrtou8(data, 0, &priv->ue_bitpos0))
> > + return -EINVAL;
> > +
> > + if (priv->ue_bitpos0 <= UE_MAX_BITPOS_LOWER)
> > + writel(1 << priv->ue_bitpos0, priv->baseaddr +
> OCM_FID0_OFST);
> > + else if (priv->ue_bitpos0 <= UE_MAX_BITPOS_UPPER)
> > + writel(1 << (priv->ue_bitpos0 - UE_MIN_BITPOS_UPPER),
> > + priv->baseaddr + OCM_FID1_OFST);
> > + else
> > + edac_printk(KERN_ERR, EDAC_DEVICE,
> > + "Bit position > 64 is not valid\n");
> > + edac_printk(KERN_INFO, EDAC_DEVICE,
> > + "Set another bit position for UE\n");
> > +
> > + return count;
> > +}
> > +
> > +/**
> > + * zynqmp_ocm_edac_inject_uebitpos1_show - Shows UE bit postion1
> > + * @dci: Pointer to the edac device struct
> > + * @data: Pointer to user data
> > + *
> > + * Shows the second bit position configured for UE error
> > + * Return: Number of bytes copied on success else error code.
> > + */
> > +static ssize_t zynqmp_ocm_edac_inject_uebitpos1_show(struct
> edac_device_ctl_info *dci,
> > + char *data)
> > +{
> > + struct zynqmp_ocm_edac_priv *priv = dci->pvt_info;
> > +
> > + if (priv->ue_bitpos1 <= UE_MAX_BITPOS_LOWER)
> > + return sprintf(data, "Fault Injection Data Reg: [0x%x]\n",
> > + ((readl(priv->baseaddr + OCM_FID0_OFST))));
> > +
> > + return sprintf(data, "Fault Injection Data Reg: [0x%x]\n",
> > + ((readl(priv->baseaddr + OCM_FID1_OFST))));
> > +}
> > +
> > +/**
> > + * zynqmp_ocm_edac_inject_uebitpos1_store - Set UE second bit position
> > + * @dci: Pointer to the edac device struct
> > + * @data: Pointer to user data
> > + * @count: read the size bytes from buffer
> > + *
> > + * Set the second bit position for UE Error generation,we need to
> configure
> > + * any two bit positions to inject UE Error
> > + * Return: Number of bytes copied on success else error code.
> > + */
> > +static ssize_t zynqmp_ocm_edac_inject_uebitpos1_store(struct
> edac_device_ctl_info *dci,
> > + const char *data, size_t
> count)
>
> This is clumsy: you wanna have this
>
> echo <uebitpos0>,<uebitpos1> > /sys/kernel/debug/...
>
> and then a *single* function parses those, picks them apart and programs
> the hardware.
>
> Not two pretty much independent functions.
Ok, will switch to debugfs based on your comments and this will be taken care.
>
> > +{
> > + struct zynqmp_ocm_edac_priv *priv = dci->pvt_info;
> > + u32 mask;
> > +
> > + if (!data)
> > + return -EFAULT;
> > +
> > + if (kstrtou8(data, 0, &priv->ue_bitpos1))
> > + return -EINVAL;
> > +
> > + if (priv->ue_bitpos0 == priv->ue_bitpos1) {
> > + edac_printk(KERN_ERR, EDAC_DEVICE,
> > + "Bit positions should not be equal\n");
> > + return -EINVAL;
> > + }
> > +
> > + /*
> > + * If both bit positions are referring to 32 bit data, then configure
> > + * only FID0 register or if it is 64 bit data, then configure only
> > + * FID1 register.
> > + */
> > + if (priv->ue_bitpos0 <= UE_MAX_BITPOS_LOWER &&
> > + priv->ue_bitpos1 <= UE_MAX_BITPOS_LOWER) {
> > + mask = (1 << priv->ue_bitpos0);
> > + mask |= (1 << priv->ue_bitpos1);
> > + writel(mask, priv->baseaddr + OCM_FID0_OFST);
> > + writel(0, priv->baseaddr + OCM_FID1_OFST);
> > + } else if ((priv->ue_bitpos0 >= UE_MIN_BITPOS_UPPER &&
> > + priv->ue_bitpos0 <= UE_MAX_BITPOS_UPPER) &&
> > + (priv->ue_bitpos1 >= UE_MIN_BITPOS_UPPER &&
> > + priv->ue_bitpos1 <= UE_MAX_BITPOS_UPPER)) {
> > + mask = (1 << (priv->ue_bitpos0 - UE_MIN_BITPOS_UPPER));
> > + mask |= (1 << (priv->ue_bitpos1 - UE_MIN_BITPOS_UPPER));
> > + writel(mask, priv->baseaddr + OCM_FID1_OFST);
> > + writel(0, priv->baseaddr + OCM_FID0_OFST);
> > + }
> > +
> > + /*
> > + * If one bit position is referring a bit in 32 bit data and other in
> > + * 64 bit data, just configure FID0/FID1 based on uebitpos1.
> > + */
> > + if (priv->ue_bitpos0 <= UE_MAX_BITPOS_LOWER &&
> > + (priv->ue_bitpos1 >= UE_MIN_BITPOS_UPPER &&
> > + priv->ue_bitpos1 <= UE_MAX_BITPOS_UPPER)) {
> > + writel(1 << (priv->ue_bitpos1 - UE_MIN_BITPOS_UPPER),
> > + priv->baseaddr + OCM_FID1_OFST);
> > + } else if ((priv->ue_bitpos0 >= UE_MIN_BITPOS_UPPER &&
> > + priv->ue_bitpos0 <= UE_MAX_BITPOS_UPPER) &&
> > + (priv->ue_bitpos1 <= UE_MAX_BITPOS_LOWER)) {
> > + writel(1 << priv->ue_bitpos1,
> > + priv->baseaddr + OCM_FID0_OFST);
> > + } else {
> > + edac_printk(KERN_ERR, EDAC_DEVICE,
> > + "Bit position > 64 is not valid, Valid bits:[63:0]\n");
> > + }
> > +
> > + edac_printk(KERN_INFO, EDAC_DEVICE,
> > + "UE at Bit Position0: %d Bit Position1: %d\n",
> > + priv->ue_bitpos0, priv->ue_bitpos1);
> > +
> > + return count;
> > +}
> > +
> > +static struct edac_dev_sysfs_attribute
> zynqmp_ocm_edac_sysfs_attributes[] = {
>
> debugfs ofc - not sysfs.
Ok.
>
> > + {
> > + .attr = {
> > + .name = "inject_cebitpos",
> > + .mode = (0644)
> > + },
> > + .show = zynqmp_ocm_edac_inject_cebitpos_show,
> > + .store = zynqmp_ocm_edac_inject_cebitpos_store},
> > + {
> > + .attr = {
> > + .name = "inject_uebitpos0",
> > + .mode = (0644)
> > + },
> > + .show = zynqmp_ocm_edac_inject_uebitpos0_show,
> > + .store = zynqmp_ocm_edac_inject_uebitpos0_store},
> > + {
> > + .attr = {
> > + .name = "inject_uebitpos1",
> > + .mode = (0644)
> > + },
> > + .show = zynqmp_ocm_edac_inject_uebitpos1_show,
> > + .store = zynqmp_ocm_edac_inject_uebitpos1_store},
> > + {
> > + .attr = {
> > + .name = "inject_fault_count",
> > + .mode = (0644)
> > + },
> > + .show = zynqmp_ocm_edac_inject_fault_count_show,
> > + .store = zynqmp_ocm_edac_inject_fault_count_store},
> > + /* End of list */
> > + {
> > + .attr = {.name = NULL}
> > + }
> > +};
> > +
> > +/**
> > + * zynqmp_set_ocm_edac_sysfs_attributes - create sysfs attributes
> > + * @edac_dev: Pointer to the edac device struct
> > + *
> > + * Creates sysfs entries for error injection
> > + */
> > +static void zynqmp_set_ocm_edac_sysfs_attributes(struct
> edac_device_ctl_info
> > + *edac_dev)
> > +{
> > + edac_dev->sysfs_attributes = zynqmp_ocm_edac_sysfs_attributes;
> > +}
> > +
> > +static int zynqmp_ocm_edac_probe(struct platform_device *pdev)
> > +{
> > + struct zynqmp_ocm_edac_priv *priv;
> > + struct edac_device_ctl_info *dci;
> > + void __iomem *baseaddr;
> > + struct resource *res;
> > + int irq, ret;
> > +
> > + baseaddr = devm_platform_get_and_ioremap_resource(pdev, 0,
> &res);
> > + if (IS_ERR(baseaddr))
> > + return PTR_ERR(baseaddr);
> > +
> > + if (!zynqmp_ocm_edac_get_eccstate(baseaddr)) {
> > + edac_printk(KERN_INFO, EDAC_DEVICE,
> > + "ECC not enabled\n");
> > + return -ENXIO;
> > + }
> > +
> > + dci = edac_device_alloc_ctl_info(sizeof(*priv),
> ZYNQMP_OCM_EDAC_STRING,
> > + 1, ZYNQMP_OCM_EDAC_STRING, 1,
> 0, NULL, 0,
> > + edac_device_alloc_index());
> > + if (!dci)
> > + return -ENOMEM;
> > +
> > + priv = dci->pvt_info;
> > + platform_set_drvdata(pdev, dci);
> > + dci->dev = &pdev->dev;
> > + priv->baseaddr = baseaddr;
> > + dci->mod_name = pdev->dev.driver->name;
> > + dci->ctl_name = ZYNQMP_OCM_EDAC_STRING;
> > + dci->dev_name = dev_name(&pdev->dev);
> > +
> > + irq = platform_get_irq(pdev, 0);
> > + if (irq < 0) {
> > + ret = irq;
> > + goto free_dev_ctl;
> > + }
> > +
> > + ret = devm_request_irq(&pdev->dev, irq,
> > + zynqmp_ocm_edac_intr_handler,
> > + 0, dev_name(&pdev->dev), dci);
> > + if (ret) {
> > + edac_printk(KERN_ERR, EDAC_DEVICE, "Failed to request
> Irq\n");
> > + goto free_dev_ctl;
> > + }
> > +
> > + writel(OCM_CEUE_MASK, priv->baseaddr + OCM_IEN_OFST);
>
> Now that wants to be a separate function or at least have a comment
> above it about what it does.
Ok, will add a comment to this.
>
> > +
> > + zynqmp_set_ocm_edac_sysfs_attributes(dci);
>
> <-- newline
Ok.

Regards
Sai Krishna
>
> > + ret = edac_device_add_device(dci);
> > + if (ret)
> > + goto free_dev_ctl;
> > +
> > + return 0;
> > +
> > +free_dev_ctl:
> > + edac_device_free_ctl_info(dci);
> > +
> > + return ret;
> > +}
>
> Thx.
>
> --
> Regards/Gruss,
> Boris.
>
> https://people.kernel.org/tglx/notes-about-netiquette
\
 
 \ /
  Last update: 2022-10-19 15:16    [W:0.087 / U:0.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site