lkml.org 
[lkml]   [2022]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.10 1/2] arm64: topology: move store_cpu_topology() to shared code
Date
commit 456797da792fa7cbf6698febf275fe9b36691f78 upstream.

arm64's method of defining a default cpu topology requires only minimal
changes to apply to RISC-V also. The current arm64 implementation exits
early in a uniprocessor configuration by reading MPIDR & claiming that
uniprocessor can rely on the default values.

This is appears to be a hangover from prior to '3102bc0e6ac7 ("arm64:
topology: Stop using MPIDR for topology information")', because the
current code just assigns default values for multiprocessor systems.

With the MPIDR references removed, store_cpu_topolgy() can be moved to
the common arch_topology code.

Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
---
arch/arm64/kernel/topology.c | 40 ------------------------------------
drivers/base/arch_topology.c | 19 +++++++++++++++++
2 files changed, 19 insertions(+), 40 deletions(-)

diff --git a/arch/arm64/kernel/topology.c b/arch/arm64/kernel/topology.c
index 4358bc319306..f35af19b7055 100644
--- a/arch/arm64/kernel/topology.c
+++ b/arch/arm64/kernel/topology.c
@@ -22,46 +22,6 @@
#include <asm/cputype.h>
#include <asm/topology.h>

-void store_cpu_topology(unsigned int cpuid)
-{
- struct cpu_topology *cpuid_topo = &cpu_topology[cpuid];
- u64 mpidr;
-
- if (cpuid_topo->package_id != -1)
- goto topology_populated;
-
- mpidr = read_cpuid_mpidr();
-
- /* Uniprocessor systems can rely on default topology values */
- if (mpidr & MPIDR_UP_BITMASK)
- return;
-
- /*
- * This would be the place to create cpu topology based on MPIDR.
- *
- * However, it cannot be trusted to depict the actual topology; some
- * pieces of the architecture enforce an artificial cap on Aff0 values
- * (e.g. GICv3's ICC_SGI1R_EL1 limits it to 15), leading to an
- * artificial cycling of Aff1, Aff2 and Aff3 values. IOW, these end up
- * having absolutely no relationship to the actual underlying system
- * topology, and cannot be reasonably used as core / package ID.
- *
- * If the MT bit is set, Aff0 *could* be used to define a thread ID, but
- * we still wouldn't be able to obtain a sane core ID. This means we
- * need to entirely ignore MPIDR for any topology deduction.
- */
- cpuid_topo->thread_id = -1;
- cpuid_topo->core_id = cpuid;
- cpuid_topo->package_id = cpu_to_node(cpuid);
-
- pr_debug("CPU%u: cluster %d core %d thread %d mpidr %#016llx\n",
- cpuid, cpuid_topo->package_id, cpuid_topo->core_id,
- cpuid_topo->thread_id, mpidr);
-
-topology_populated:
- update_siblings_masks(cpuid);
-}
-
#ifdef CONFIG_ACPI
static bool __init acpi_cpu_is_threaded(int cpu)
{
diff --git a/drivers/base/arch_topology.c b/drivers/base/arch_topology.c
index 8272a3a002a3..51647926e605 100644
--- a/drivers/base/arch_topology.c
+++ b/drivers/base/arch_topology.c
@@ -596,4 +596,23 @@ void __init init_cpu_topology(void)
else if (of_have_populated_dt() && parse_dt_topology())
reset_cpu_topology();
}
+
+void store_cpu_topology(unsigned int cpuid)
+{
+ struct cpu_topology *cpuid_topo = &cpu_topology[cpuid];
+
+ if (cpuid_topo->package_id != -1)
+ goto topology_populated;
+
+ cpuid_topo->thread_id = -1;
+ cpuid_topo->core_id = cpuid;
+ cpuid_topo->package_id = cpu_to_node(cpuid);
+
+ pr_debug("CPU%u: package %d core %d thread %d\n",
+ cpuid, cpuid_topo->package_id, cpuid_topo->core_id,
+ cpuid_topo->thread_id);
+
+topology_populated:
+ update_siblings_masks(cpuid);
+}
#endif
--
2.38.0
\
 
 \ /
  Last update: 2022-10-19 15:11    [W:0.075 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site