lkml.org 
[lkml]   [2022]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v5 2/5] Documentation: rs485: Link reference properly
    Date
    Link DT bindings reference properly.

    Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
    Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
    ---
    Documentation/driver-api/serial/serial-rs485.rst | 8 ++++----
    1 file changed, 4 insertions(+), 4 deletions(-)

    diff --git a/Documentation/driver-api/serial/serial-rs485.rst b/Documentation/driver-api/serial/serial-rs485.rst
    index 264e4b753713..513758a702a6 100644
    --- a/Documentation/driver-api/serial/serial-rs485.rst
    +++ b/Documentation/driver-api/serial/serial-rs485.rst
    @@ -33,9 +33,9 @@ RS485 Serial Communications
    communications. This data structure is used to set and configure RS485
    parameters in the platform data and in ioctls.

    - The device tree can also provide RS485 boot time parameters (see [1]
    - for bindings). The driver is in charge of filling this data structure from
    - the values given by the device tree.
    + The device tree can also provide RS485 boot time parameters
    + [#DT-bindings]_. The driver is in charge of filling this data structure
    + from the values given by the device tree.

    Any driver for devices capable of working both as RS232 and RS485 should
    implement the rs485_config callback and provide rs485_supported in the
    @@ -129,4 +129,4 @@ RS485 Serial Communications
    6. References
    =============

    - [1] Documentation/devicetree/bindings/serial/rs485.txt
    +.. [#DT-bindings] Documentation/devicetree/bindings/serial/rs485.txt
    --
    2.30.2
    \
     
     \ /
      Last update: 2022-10-19 13:50    [W:3.059 / U:0.156 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site