lkml.org 
[lkml]   [2022]   [Oct]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 10/15] dt-bindings: phy: qcom,qmp-pcie: add sc8280xp bindings
On Mon, Oct 17, 2022 at 01:20:49PM -0400, Krzysztof Kozlowski wrote:
> On 17/10/2022 10:53, Johan Hovold wrote:
> > Add bindings for the PCIe QMP PHYs found on SC8280XP.
> >
> > The PCIe2 and PCIe3 controllers and PHYs on SC8280XP can be used in
> > 4-lane mode or as separate controllers and PHYs in 2-lane mode (e.g. as
> > PCIe2A and PCIe2B).
> >
> > The configuration for a specific system can be read from a TCSR register.
> >
> > Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> > ---
> > .../bindings/phy/qcom,qmp-pcie-phy.yaml | 163 ++++++++++++++++++
> > 1 file changed, 163 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml
> > new file mode 100644
> > index 000000000000..82da95eaa9d6
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml
>
> Filename based on compatible, so for example:
>
> qcom,sc8280xp-qmp-pcie-phy.yaml

Ok, but as I mentioned in my reply to the previous patch, this file is
the one that is expected to be extended with new bindings.

I can't seem to find where this naming scheme is documented now even if
I'm quite sure I've seen it before. Do you have a pointer?

And does this imply that the file name should also include the gen infix
of one of the original compatibles (e.g.
"qcom,sc8280xp-qmp-gen3x4-pcie-phy.yaml")?

> > @@ -0,0 +1,163 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/phy/qcom,qmp-pcie-phy.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm QMP PHY controller (PCIe)
> > +
> > +maintainers:
> > + - Vinod Koul <vkoul@kernel.org>
> > +
> > +description:
> > + QMP PHY controller supports physical layer functionality for a number of
> > + controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - qcom,sc8280xp-qmp-gen3x1-pcie-phy
> > + - qcom,sc8280xp-qmp-gen3x2-pcie-phy
> > + - qcom,sc8280xp-qmp-gen3x4-pcie-phy

> > + qcom,4ln-config-sel:
> > + description: 4-lane configuration as TCSR syscon phandle, register offset
> > + and bit number
> > + $ref: /schemas/types.yaml#/definitions/phandle-array
> > + items:
> > + maxItems: 3
>
> You have only one phandle, so you need to describe the items and limit
> their number, like here:
>
> https://elixir.bootlin.com/linux/v5.18-rc1/source/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml#L42
>
> This allows you to skip most of property description.

Ah, thanks, makes perfect sense. I based this one of the in-tree
bindings which had been reviewed by Rob and must have thought it was
some special phandle-array notation to express the same.

Johan

\
 
 \ /
  Last update: 2022-10-18 11:41    [W:0.102 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site