lkml.org 
[lkml]   [2022]   [Oct]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH V5 1/2] ACPI / scan: Support multiple dma windows with different offsets
From
Date
On 2022/9/11 17:06, Jianmin Lv wrote:
> In DT systems configurations, of_dma_get_range() returns struct
> bus_dma_region DMA regions; they are used to set-up devices
> DMA windows with different offset available for translation between DMA
> address and CPU address.
>
> In ACPI systems configuration, acpi_dma_get_range() does not return
> DMA regions yet and that precludes setting up the dev->dma_range_map
> pointer and therefore DMA regions with multiple offsets.
>
> Update acpi_dma_get_range() to return struct bus_dma_region
> DMA regions like of_dma_get_range() does.
>
> After updating acpi_dma_get_range(), acpi_arch_dma_setup() is changed for
> ARM64, where the original dma_addr and size are removed as these
> arguments are now redundant, and pass 0 and U64_MAX for dma_base
> and size of arch_setup_dma_ops; this is a simplification consistent
> with what other ACPI architectures also pass to iommu_setup_dma_ops().
>

Hi,

With this patch we met problem as well. The DMA coherent mask is not set correctly
for a ehci usb controller and lead to the below calltrace:

[ 16.699259] ------------[ cut here ]------------
[ 16.703855] WARNING: CPU: 0 PID: 853 at kernel/dma/mapping.c:499 dma_alloc_attrs+0xc0/0xf0
[ 16.712082] Modules linked in:
[ 16.715124] CPU: 0 PID: 853 Comm: kworker/0:3 Not tainted 6.1.0-rc1-pipe-deadlock+ #5
[ 16.722916] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V5.B211.01 11/10/2021
[ 16.731745] Workqueue: events work_for_cpu_fn
[ 16.736083] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 16.743013] pc : dma_alloc_attrs+0xc0/0xf0
[ 16.747091] lr : dma_pool_alloc+0x11c/0x200
[ 16.751255] sp : ffff80001e46bb50
[ 16.754554] x29: ffff80001e46bb50 x28: 0000000000000000 x27: 0000000000000000
[ 16.761657] x26: ffff80000b33ce18 x25: ffff800009cc6c48 x24: 0000000000000000
[ 16.768759] x23: ffff00208c830918 x22: 0000000000001000 x21: 0000000000000cc0
[ 16.775861] x20: ffff00208ae82080 x19: ffff0020865c40d0 x18: 0000000000000030
[ 16.782964] x17: 626d756e20737562 x16: 2064656e67697373 x15: ffff00208ae82640
[ 16.790066] x14: 0000000000000000 x13: 646e756f72616b72 x12: 6f77204348207379
[ 16.797167] x11: 73706f6e79532067 x10: ffff205f43980000 x9 : ffff80000830b3ac
[ 16.804269] x8 : ffff0020861b1b00 x7 : 0000000000000000 x6 : 0000000000000000
[ 16.811371] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000cc0
[ 16.818472] x2 : ffff00208c830918 x1 : 0000000000001000 x0 : 0000000000000000
[ 16.825574] Call trace:
[ 16.828009] dma_alloc_attrs+0xc0/0xf0
[ 16.831741] dma_pool_alloc+0x11c/0x200
[ 16.835559] ehci_qh_alloc+0x60/0x12c
[ 16.839207] ehci_setup+0x18c/0x40c
[ 16.842680] ehci_pci_setup+0xb8/0x680
[ 16.846412] usb_add_hcd+0x310/0x5c0
[ 16.849973] usb_hcd_pci_probe+0x254/0x36c
[ 16.854051] ehci_pci_probe+0x40/0x60
[ 16.857698] local_pci_probe+0x48/0xb4
[ 16.861431] work_for_cpu_fn+0x24/0x40
[ 16.865163] process_one_work+0x1e0/0x450
[ 16.869155] worker_thread+0x2cc/0x44c
[ 16.872886] kthread+0x114/0x120
[ 16.876099] ret_from_fork+0x10/0x20
[ 16.879657] ---[ end trace 0000000000000000 ]---

After reverting this patch the problem resolved. Tested on the latest 6.1-rc1.
Some investigation below...


> Reviewed-by: Robin Murphy <robin.murphy@arm.com>
> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
> ---
> drivers/acpi/arm64/dma.c | 28 ++++++++++++---------
> drivers/acpi/scan.c | 53 +++++++++++++++++-----------------------
> include/acpi/acpi_bus.h | 3 +--
> include/linux/acpi.h | 7 +++---
> 4 files changed, 44 insertions(+), 47 deletions(-)
>
> diff --git a/drivers/acpi/arm64/dma.c b/drivers/acpi/arm64/dma.c
> index f16739ad3cc0..93d796531af3 100644
> --- a/drivers/acpi/arm64/dma.c
> +++ b/drivers/acpi/arm64/dma.c
> @@ -4,11 +4,12 @@
> #include <linux/device.h>
> #include <linux/dma-direct.h>
>
> -void acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size)
> +void acpi_arch_dma_setup(struct device *dev)
> {
> int ret;
> u64 end, mask;
> - u64 dmaaddr = 0, size = 0, offset = 0;
> + u64 size = 0;
> + const struct bus_dma_region *map = NULL;
>
> /*
> * If @dev is expected to be DMA-capable then the bus code that created
> @@ -26,7 +27,19 @@ void acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size)
> else
> size = 1ULL << 32;
>
> - ret = acpi_dma_get_range(dev, &dmaaddr, &offset, &size);
> + ret = acpi_dma_get_range(dev, &map);
> + if (!ret && map) {
> + const struct bus_dma_region *r = map;
> +
> + for (end = 0; r->size; r++) {
> + if (r->dma_start + r->size - 1 > end)
> + end = r->dma_start + r->size - 1;
> + }
> +

DSDT reports a window of [mem 0x00000000-0xffffffff pref] in _DMA for the target device
but we're not retriving it correctly here. After adding some messages, it shows we haven't
enter this loop and make size as 1 and mask to 0 finally.

Please let me know if you need more information.

Thanks.

> + size = end + 1;
> + dev->dma_range_map = map;
> + }
> +
> if (ret == -ENODEV)
> ret = iort_dma_get_ranges(dev, &size);
> if (!ret) {
> @@ -34,17 +47,10 @@ void acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size)
> * Limit coherent and dma mask based on size retrieved from
> * firmware.
> */
> - end = dmaaddr + size - 1;
> + end = size - 1;
> mask = DMA_BIT_MASK(ilog2(end) + 1);
> dev->bus_dma_limit = end;
> dev->coherent_dma_mask = min(dev->coherent_dma_mask, mask);
> *dev->dma_mask = min(*dev->dma_mask, mask);
> }
> -
> - *dma_addr = dmaaddr;
> - *dma_size = size;
> -
> - ret = dma_direct_set_offset(dev, dmaaddr + offset, dmaaddr, size);
> -
> - dev_dbg(dev, "dma_offset(%#08llx)%s\n", offset, ret ? " failed!" : "");
> }
> diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
> index 42cec8120f18..f96ef8536037 100644
> --- a/drivers/acpi/scan.c
> +++ b/drivers/acpi/scan.c
> @@ -20,6 +20,7 @@
> #include <linux/platform_data/x86/apple.h>
> #include <linux/pgtable.h>
> #include <linux/crc32.h>
> +#include <linux/dma-direct.h>
>
> #include "internal.h"
>
> @@ -1467,25 +1468,21 @@ enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev)
> * acpi_dma_get_range() - Get device DMA parameters.
> *
> * @dev: device to configure
> - * @dma_addr: pointer device DMA address result
> - * @offset: pointer to the DMA offset result
> - * @size: pointer to DMA range size result
> + * @map: pointer to DMA ranges result
> *
> - * Evaluate DMA regions and return respectively DMA region start, offset
> - * and size in dma_addr, offset and size on parsing success; it does not
> - * update the passed in values on failure.
> + * Evaluate DMA regions and return pointer to DMA regions on
> + * parsing success; it does not update the passed in values on failure.
> *
> * Return 0 on success, < 0 on failure.
> */
> -int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset,
> - u64 *size)
> +int acpi_dma_get_range(struct device *dev, const struct bus_dma_region **map)
> {
> struct acpi_device *adev;
> LIST_HEAD(list);
> struct resource_entry *rentry;
> int ret;
> struct device *dma_dev = dev;
> - u64 len, dma_start = U64_MAX, dma_end = 0, dma_offset = 0;
> + struct bus_dma_region *r;
>
> /*
> * Walk the device tree chasing an ACPI companion with a _DMA
> @@ -1510,31 +1507,28 @@ int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset,
>
> ret = acpi_dev_get_dma_resources(adev, &list);
> if (ret > 0) {
> + r = kcalloc(ret + 1, sizeof(*r), GFP_KERNEL);
> + if (!r) {
> + ret = -ENOMEM;
> + goto out;
> + }
> +
> list_for_each_entry(rentry, &list, node) {
> - if (dma_offset && rentry->offset != dma_offset) {
> + if (rentry->res->start >= rentry->res->end) {
> + kfree(r);
> ret = -EINVAL;
> - dev_warn(dma_dev, "Can't handle multiple windows with different offsets\n");
> + dev_dbg(dma_dev, "Invalid DMA regions configuration\n");
> goto out;
> }
> - dma_offset = rentry->offset;
>
> - /* Take lower and upper limits */
> - if (rentry->res->start < dma_start)
> - dma_start = rentry->res->start;
> - if (rentry->res->end > dma_end)
> - dma_end = rentry->res->end;
> - }
> -
> - if (dma_start >= dma_end) {
> - ret = -EINVAL;
> - dev_dbg(dma_dev, "Invalid DMA regions configuration\n");
> - goto out;
> + r->cpu_start = rentry->res->start;
> + r->dma_start = rentry->res->start - rentry->offset;
> + r->size = resource_size(rentry->res);
> + r->offset = rentry->offset;
> + r++;
> }
>
> - *dma_addr = dma_start - dma_offset;
> - len = dma_end - dma_start;
> - *size = max(len, len + 1);
> - *offset = dma_offset;
> + *map = r;
> }
> out:
> acpi_dev_free_resource_list(&list);
> @@ -1624,20 +1618,19 @@ int acpi_dma_configure_id(struct device *dev, enum dev_dma_attr attr,
> const u32 *input_id)
> {
> const struct iommu_ops *iommu;
> - u64 dma_addr = 0, size = 0;
>
> if (attr == DEV_DMA_NOT_SUPPORTED) {
> set_dma_ops(dev, &dma_dummy_ops);
> return 0;
> }
>
> - acpi_arch_dma_setup(dev, &dma_addr, &size);
> + acpi_arch_dma_setup(dev);
>
> iommu = acpi_iommu_configure_id(dev, input_id);
> if (PTR_ERR(iommu) == -EPROBE_DEFER)
> return -EPROBE_DEFER;
>
> - arch_setup_dma_ops(dev, dma_addr, size,
> + arch_setup_dma_ops(dev, 0, U64_MAX,
> iommu, attr == DEV_DMA_COHERENT);
>
> return 0;
> diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
> index e7d27373ff71..73ac4a1d6947 100644
> --- a/include/acpi/acpi_bus.h
> +++ b/include/acpi/acpi_bus.h
> @@ -613,8 +613,7 @@ enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev);
> int acpi_iommu_fwspec_init(struct device *dev, u32 id,
> struct fwnode_handle *fwnode,
> const struct iommu_ops *ops);
> -int acpi_dma_get_range(struct device *dev, u64 *dma_addr, u64 *offset,
> - u64 *size);
> +int acpi_dma_get_range(struct device *dev, const struct bus_dma_region **map);
> int acpi_dma_configure_id(struct device *dev, enum dev_dma_attr attr,
> const u32 *input_id);
> static inline int acpi_dma_configure(struct device *dev,
> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> index 6f64b2f3dc54..bb41623dab77 100644
> --- a/include/linux/acpi.h
> +++ b/include/linux/acpi.h
> @@ -281,12 +281,12 @@ void acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa);
>
> #ifdef CONFIG_ARM64
> void acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa);
> -void acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size);
> +void acpi_arch_dma_setup(struct device *dev);
> #else
> static inline void
> acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa) { }
> static inline void
> -acpi_arch_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size) { }
> +acpi_arch_dma_setup(struct device *dev) { }
> #endif
>
> int acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma);
> @@ -977,8 +977,7 @@ static inline enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev)
> return DEV_DMA_NOT_SUPPORTED;
> }
>
> -static inline int acpi_dma_get_range(struct device *dev, u64 *dma_addr,
> - u64 *offset, u64 *size)
> +static inline int acpi_dma_get_range(struct device *dev, const struct bus_dma_region **map)
> {
> return -ENODEV;
> }
>

\
 
 \ /
  Last update: 2022-10-18 11:34    [W:0.078 / U:1.860 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site