lkml.org 
[lkml]   [2022]   [Oct]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH V8 XDMA 0/2] xilinx XDMA driver
From
On 17. 10. 22 18:02, Lizhi Hou wrote:
> Hello,
>
> This V8 of patch series is to provide the platform driver to support the
> Xilinx XDMA subsystem. The XDMA subsystem is used in conjunction with the
> PCI Express IP block to provide high performance data transfer between host
> memory and the card's DMA subsystem. It also provides up to 16 user
> interrupt wires to user logic that generate interrupts to the host.
>
> +-------+ +-------+ +-----------+
> PCIe | | | | | |
> Tx/Rx | | | | AXI | |
> <=======> | PCIE | <===> | XDMA | <====>| User Logic|
> | | | | | |
> +-------+ +-------+ +-----------+
>
> The XDMA has been used for Xilinx Alveo PCIe devices.
> And it is also integrated into Versal ACAP DMA and Bridge Subsystem.
> https://www.xilinx.com/products/boards-and-kits/alveo.html
> https://docs.xilinx.com/r/en-US/pg344-pcie-dma-versal/Introduction-to-the-DMA-and-Bridge-Subsystems
>
> The device driver for any FPGA based PCIe device which leverages XDMA can
> call the standard dmaengine APIs to discover and use the XDMA subsystem
> without duplicating the XDMA driver code in its own driver.
>
> Changes since v7
> - Use pci device pointer for dma_pool_create().
>
> Changes since v6:
> - Fixed descriptor filling bug.
>
> Changes since v5:
> - Modified user logic interrupt APIs to handle user logic IP which does not
> have its own register to enable/disable interrupt.
> - Clean up code based on review comments.
>
> Changes since v4:
> - Modified user logic interrupt APIs.
>
> Changes since v3:
> - Added one patch to support user logic interrupt.
>
> Changes since v2:
> - Removed tasklet.
> - Fixed regression bug introduced to V2.
> - Test Robot warning.
>
> Changes since v1:
> - Moved filling hardware descriptor to xdma_prep_device_sg().
> - Changed hardware descriptor enum to "struct xdma_hw_desc".
> - Minor changes from code review comments.
>
> Lizhi Hou (2):
> dmaengine: xilinx: xdma: Add xilinx xdma driver
> dmaengine: xilinx: xdma: Add user logic interrupt support
>
> MAINTAINERS | 11 +
> drivers/dma/Kconfig | 13 +
> drivers/dma/xilinx/Makefile | 1 +
> drivers/dma/xilinx/xdma-regs.h | 171 ++++
> drivers/dma/xilinx/xdma.c | 1041 ++++++++++++++++++++++++
> include/linux/dma/amd_xdma.h | 16 +
> include/linux/platform_data/amd_xdma.h | 34 +
> 7 files changed, 1287 insertions(+)
> create mode 100644 drivers/dma/xilinx/xdma-regs.h
> create mode 100644 drivers/dma/xilinx/xdma.c
> create mode 100644 include/linux/dma/amd_xdma.h
> create mode 100644 include/linux/platform_data/amd_xdma.h
>

Hi,
Just for the record - this version works fine with our HW.

M.

\
 
 \ /
  Last update: 2022-10-18 11:08    [W:0.053 / U:0.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site